Stats
Actions
Tags
From qa-experimentation
Pure-reference catalog for interpreting the results of an online controlled experiment after harness validity is confirmed. Covers the distinction between practical and statistical significance, reading confidence intervals instead of binary p-values, novelty and primacy effects that cause post-ship reversion, interaction effects from concurrent experiments, Simpson's paradox in segmented results, and the ordered guardrail-check sequence required before a ship decision. Use when a data scientist or PM is ready to draw conclusions from an experiment whose telemetry and randomisation have already passed the ab-test-validity-checklist.
How this skill is triggered — by the user, by Claude, or both
Slash command
/qa-experimentation:experiment-results-interpreterThe summary Claude sees in its skill listing — used to decide when to auto-load this skill
The `ab-test-validity-checklist` skill confirms that an experiment
The ab-test-validity-checklist skill confirms that an experiment
was run correctly - clean SRM, honest peeking discipline, pre-declared
OEC. This skill covers the next question: given a valid experiment,
what does the result actually mean, and is it safe to ship?
The two most common failure modes at this stage, per Kohavi, Tang, Xu Trustworthy Online Controlled Experiments (Cambridge Univ. Press, 2020, ISBN 9781108724265), are:
This skill is a pure reference for data scientists and PMs reading final experiment dashboards.
Work through the six interpretation steps in order. Each step has a hard stop: if a step blocks, do not proceed to the next.
Statistical significance tells you the effect is unlikely to be noise. It does not tell you whether the effect is large enough to matter.
Per the Nielsen Norman Group's guidance on A/B testing (nngroup.com/articles/ab-testing/): "results may be statistically significant but not practically significant" - a test could show reliable differences that lack meaningful business value.
The minimum practically significant effect (MPSE) must be declared
in the pre-registration (proposal.yml). At read-time:
| Question | How to answer |
|---|---|
| Is the point estimate above the MPSE? | Compare OEC lift to the pre-declared threshold |
| Is the confidence interval entirely above the MPSE? | If the lower bound falls below the MPSE, treat as inconclusive |
| Would a 0.1% conversion lift justify the maintenance cost? | Engineering and product judgement, not statistics |
A statistically significant result with a point estimate well below the MPSE is a no-ship unless the maintenance cost is zero and the direction is consistent with strategy.
A p-value tells you one bit: is the effect non-zero? A 95% confidence interval tells you the plausible range of the true effect.
Per Statsig's documentation on confidence intervals (docs.statsig.com/stats-engine/confidence-intervals): "A 95% confidence interval should contain the true effect 95% of the time" and the interval is "an intuitive way to quantify the uncertainty" that gives "both directionality and magnitude of effects simultaneously."
Reading a result:
| CI position | Interpretation |
|---|---|
| Entirely above zero and above MPSE | Strong positive - candidate for ship |
| Entirely above zero, partially below MPSE | Positive but magnitude uncertain - extend or accept lower bound as the working estimate |
| Crosses zero | Inconclusive; do not ship on this signal |
| Entirely below zero | Negative treatment effect - do not ship |
Width matters. A narrow CI means the experiment had high power and the estimate is precise. A wide CI means the experiment was underpowered; extending runtime or pooling more traffic will narrow it. Per Microsoft Experimentation Platform's variance reduction research (microsoft.com/en-us/research/group/experimentation-platform-exp/ articles/deep-dive-into-variance-reduction/): CUPED and similar techniques produce "narrower confidence intervals, with values that are closer to the estimated effect" without sacrificing the false-positive rate - prefer platforms that apply variance reduction by default.
Do not convert CI edges back to p-values to decide - the CI is the complete picture.
A statistically and practically significant result in week 1 may not persist. Two opposing artefacts corrupt early-period estimates:
Novelty effect: users react positively to the mere newness of a change. Engagement (clicks, session length) inflates above the true long-run level. Per Wikipedia's entry on the novelty effect (en.wikipedia.org/wiki/Novelty_effect): the effect describes "an effect of introducing new elements on some activity or behavior" - a temporary boost driven by novelty rather than underlying improvement.
Primacy effect (resistance to change): new UI or workflows initially hurt task-completion and satisfaction because users have to relearn existing habits. The treatment appears worse early, then improves as users adapt. Per Kohavi et al. (ISBN 9781108724265): "novelty and primacy effects are significant causes of treatment effects changing over time but are not the sole causes."
Detection and mitigation:
| Signal | Method |
|---|---|
| Week 1 lift much larger than week 2+ | Segment metric by experiment week; compute week-over-week trend |
| Effect reversal after ship | Look for Kendall's tau trending toward zero over 14+ day window |
| New-user cohort differs from returning-user cohort | Segment by first_exposure_date - new users see no novelty decay |
Microsoft ExP research on external validity (microsoft.com/en-us/research/group/experimentation-platform-exp/ articles/external-validity-of-online-experiments-can-we-predict-the-future/): "14-day surprises" where the second week's estimate fell outside the first week's 3-sigma confidence interval occurred at roughly 4% of experiments - far more than the theoretical rate. Minimum run time: two full weeks before drawing ship conclusions from experiments that change UI patterns. For feature launches with no UX learning curve, one week may be sufficient.
An experiment running concurrently with other experiments may have its treatment effect inflated, deflated, or reversed by interference.
Two types:
Between-experiment interaction: variant A of experiment X and variant B of experiment Y are assigned to overlapping user populations. If the two treatments interact (positively or negatively), the OEC measured for X is partly caused by Y's presence. Per Microsoft ExP article "A/B Interactions: A Call to Relax" (microsoft.com/en-us/research/group/experimentation-platform-exp/ articles/): the article addresses "pitfalls of even tiny SRMs" but also addresses A/B interactions in concurrent experiment design.
Treatment spillover: a social or marketplace product where treating some users changes outcomes for untreated users in the same experiment (network effects). The control group is contaminated; the measured effect is attenuated. Kohavi et al. (ISBN 9781108724265) categorise this as a stable unit treatment value assumption (SUTVA) violation.
Detection checklist:
| Check | Pass criterion |
|---|---|
| Concurrent experiment audit | List all experiments running in the same user population during the experiment window |
| Mutual-exclusion / interaction check | For each concurrent experiment: did assignment overlap create a joint condition that was never intended? |
| SUTVA plausibility | Is the metric a per-user metric (e.g., clicks) or a network metric (e.g., messages sent to others)? Network metrics need holdout or cluster-level randomisation |
If a significant interaction is identified, the measured effect is confounded. Options: (a) isolate with mutual exclusion and re-run, (b) include the interaction term in a factorial model, (c) block ship pending analysis.
The aggregate OEC lift may be positive while every segment shows a negative or neutral lift - or vice versa. This is Simpson's paradox.
Per Wikipedia (en.wikipedia.org/wiki/Simpson%27s_paradox): "a trend appears in several groups of data but disappears or reverses when the groups are combined." The Berkeley admissions example is canonical: men appeared admitted at higher rates (44% vs 35%) in aggregate, but women had better odds in most individual departments - because women applied to more competitive departments.
In A/B testing, Simpson's paradox surfaces when:
Detection:
For each major segment (device, country, user-cohort, new vs returning):
1. Compute per-segment OEC lift and CI.
2. Verify direction is consistent with the aggregate result.
3. Check that per-segment traffic allocation matches the overall ratio.
If direction flips in a large segment: the aggregate result is misleading. Segment-level results are the truth; the aggregate is an artefact of unequal allocation. Do not ship on a positive aggregate with a negative segment that represents > 20% of users.
The ab-test-validity-checklist Step 7 includes a "segment-stability"
gate for this reason - this skill provides the interpretive depth behind
that gate.
Per guardrail-metrics-reference: no ship decision is valid without
confirming that no guardrail metric has breached its block threshold.
Ordered check:
1. Load the guardrail dashboard for the experiment.
2. For each declared guardrail metric:
a. Is the observed change within the alert threshold? (investigate, but not blocked)
b. Does the observed change breach the block threshold? (STOP - no-ship)
3. If any guardrail is on alert: document the finding and make an
explicit call (accepted risk + rationale OR extend experiment).
4. If all guardrails are within alert thresholds: proceed to ship.
Common guardrail check failures before ship:
| Anti-pattern | Consequence |
|---|---|
| OEC positive, latency guardrail in alert band, ship anyway | Regression ships; support tickets spike |
| Checking guardrails at 80% of sample (early) | Underpowered - guardrail CIs wide; false safe signal |
| Ignoring guardrails with wide CIs because "p > 0.05" | Wide CI is not clearance; it means underpowered, not unaffected |
| Trust guardrail omitted (opt-out rate) | Long-term retention damage, not captured by OEC |
The nngroup.com A/B testing guidance warns: "if you measure only one metric to determine whether your test is successful, you might disregard important information." Always check guardrails alongside the OEC.
Scenario: Redesigned onboarding flow experiment. Declared OEC:
7-day activation rate. MPSE: +0.5pp absolute. Alpha 0.05, 80% power.
Ran 14 days. Result reads: lift = +1.2pp (95% CI: +0.3pp, +2.1pp).
Step 1 - Practical significance: Point estimate +1.2pp > MPSE +0.5pp. Lower CI bound +0.3pp is below MPSE. Minimum realistic effect is 0.3pp - marginal. Discuss with product whether 0.3pp justifies the complexity.
Step 2 - CI read: CI entirely above zero; statistically significant. Width (1.8pp) is moderate. Acceptable - not underpowered.
Step 3 - Novelty check: Week 1 lift was +2.1pp; week 2 lift was +0.9pp. Declining trend. Novelty effect likely inflating week 1. Use week 2 estimate (+0.9pp) as the stable-state estimate - still above MPSE.
Step 4 - Interaction: No other experiment running in onboarding funnel. SUTVA: metric is per-user (not network). Clear.
Step 5 - Simpson's: Mobile segment (45% of traffic): lift +0.7pp. Desktop segment (55%): lift +1.6pp. Directions consistent; no paradox.
Step 6 - Guardrails: API p95 latency +3% (alert threshold +5% or +50ms block). Within alert, no breach. DAU stable. Opt-out rate flat. All green.
Ship decision: Ship, citing week-2 stable estimate +0.9pp and clean guardrails. Document novelty decay in the ship note.
| Anti-pattern | Why it fails | Fix |
|---|---|---|
| Ship on week-1 lift alone | Novelty effect inflates early results; may revert | Run at least 2 weeks; compare week 1 vs week 2 |
| Treat p-value < 0.05 as "the result" | Binary; ignores magnitude, direction, and CI width | Read the CI; compare CI to MPSE |
| Skip segment analysis | Simpson's paradox hidden in aggregate | Always segment by device, new vs returning, country |
| Ignore guardrail alerts as "not significant" | Wide CI is not clearance | Investigate every alert before ship |
| Ship on practical but not statistical significance | Effect may be noise at that magnitude | Wait for power target |
| Treat post-ship metric as experiment validation | Observational data after ship mixes causation | Experiment result is causal; post-ship is not |
| Combine result across concurrent experiments without interaction check | Confounded OEC | Audit the concurrent experiment list |
| Ship "because the direction is right" on a CI that crosses zero | Inconclusive result | Extend runtime or accept null |
ab-test-validity-checklist.
This skill assumes the harness is valid.ab-test-validity-checklist,
guardrail-metrics-reference,
peeking-problem-reference.npx claudepluginhub testland/qa --plugin qa-experimentationProvides UI/UX resources: 50+ styles, color palettes, font pairings, guidelines, charts for web/mobile across React, Next.js, Vue, Svelte, Tailwind, React Native, Flutter. Aids planning, building, reviewing interfaces.
Fetches up-to-date documentation from Context7 for libraries and frameworks like React, Next.js, Prisma. Use for setup questions, API references, and code examples.