winui-ui-testing

Approach

The goal of this skill is to validate UI and app functionality automatically, without manual interaction, by exercising the app's UI elements, verifying their state, and asserting that the app behaves as expected under test conditions.

There are two main approaches:

1. Interactive exploration — manually run the app, use winapp ui <command> to explore the UI tree, find AutomationIds, verify element properties, and test functionality interactively. This is useful for discovery, but slow and expensive if repeated for every test iteration.
2. Scripted batch testing — generate a ui-tests.ps1 script that exercises all UI elements and asserts expected behavior in one pass. This allows you to run the tests automatically, capture results, and iterate quickly without manually interacting with the app each time.

Unless the user asked for interactive exploration, or you are unfamiliar with the code/app or need to explore the UI tree to discover AutomationIds for hidden or dynamically generated elements (flyouts, dialogs, lazy-loaded content), prefer scripted batch testing — it is faster, repeatable, and produces a record of pass/fail results that can be reviewed and acted on.

winapp ui Verbs

status, inspect, search, get-property, get-value, screenshot, invoke, click, set-value, focus, scroll, scroll-into-view, wait-for, list-windows, get-focused. Run winapp ui --cli-schema for the complete command structure as JSON, or winapp ui <verb> --help for any single verb.

Step 1: Use the Running App

If the app is already running, use its PID. Do NOT relaunch — use the PID already captured from the build step. If the app is not running, build and launch it using the guidance in the winui-dev-workflow skill.

Step 2: Write the Test Script

If you wrote the code: Skip inspect — you already know all the AutomationIds and control structure from the XAML and code-behind. Write tests directly from that knowledge. Inspect misses popups, flyouts, dialogs, and lazy-loaded content anyway.

If you're verifying code you didn't write: Run inspect first to discover the UI:

winapp ui inspect -a <PID> --interactive

Then read the XAML files to find AutomationIds that aren't currently visible (flyout items, dialog buttons, secondary pages).

Create a ui-tests.ps1 file that tests all the app's requirements in one pass:

# ui-tests.ps1
param([Parameter(Mandatory)][int]$AppPid)
# NOTE: Do NOT name the parameter $Pid — it's read-only in PowerShell

$ErrorActionPreference = 'Continue'
$pass = 0; $fail = 0; $results = @()

# Get main window HWND (avoids PopupHost interference with JSON parsing)
$windows = winapp ui list-windows -a $AppPid --json 2>$null | ConvertFrom-Json
$hwnd = ($windows | Where-Object { $_.title -ne "PopupHost" } | Select-Object -First 1).hwnd

function Test-UI {
    param([string]$Name, [scriptblock]$Script)
    # IMPORTANT: Inside $Script, use 'throw' to signal failure — NOT 'exit 1'
    # (exit terminates the entire script, not just the test)
    try {
        $output = & $Script 2>&1
        if ($LASTEXITCODE -eq 0) {
            $script:pass++; $script:results += @{ name = $Name; status = "PASS" }
        } else {
            $script:fail++; $script:results += @{ name = $Name; status = "FAIL"; detail = "$output" }
        }
    } catch {
        $script:fail++; $script:results += @{ name = $Name; status = "FAIL"; detail = "$_" }
    }
}

# ─── Element Existence ───
Test-UI "NavHome exists" { winapp ui wait-for "NavHome" -a $AppPid -t 3000 }
Test-UI "NavSettings exists" { winapp ui wait-for "NavSettings" -a $AppPid -t 3000 }

# ─── Navigation ───
Test-UI "Navigate to Settings" { winapp ui invoke "NavSettings" -a $AppPid }
Test-UI "Settings page loaded" { winapp ui wait-for "TxtUserName" -a $AppPid -t 3000 }

# ─── Interactions ───
Test-UI "Set username" { winapp ui set-value "TxtUserName" "TestUser" -a $AppPid }
Test-UI "Click Save" { winapp ui invoke "BtnSave" -a $AppPid }  # commits the TextBox binding
Test-UI "Username value set" {
    winapp ui wait-for "TxtUserName" -a $AppPid --value "TestUser" -t 2000
}

# ─── Value assertions for different control types ───
Test-UI "Theme is System default" {
    winapp ui wait-for "CmbTheme" -a $AppPid --value "System default" -t 2000
}
Test-UI "Logging is off" {
    winapp ui wait-for "TglLogging" -a $AppPid --value "Off" -t 2000
}

# ─── Accessibility Audit ───
# Only audit controls in the app's main window (exclude OS picker/popup controls)
$allElements = (winapp ui inspect -a $AppPid --interactive --json 2>$null | ConvertFrom-Json).elements
$appElements = @($allElements | Where-Object {
    $_.type -match 'Button|TextBox|ComboBox|CheckBox|ToggleSwitch|TabItem|Edit' -and
    $_.name -notmatch 'Minimize|Maximize|Close|System' -and          # window chrome
    $_.className -notmatch 'PickerHost|#32770|CabinetWClass'         # OS dialogs
})
$missingId = @($appElements | Where-Object { -not $_.automationId })
if ($missingId.Count -eq 0) {
    $pass++; $results += @{ name = "All app controls have AutomationId"; status = "PASS" }
} else {
    $fail++
    $names = ($missingId | ForEach-Object { "$($_.type) '$($_.name)'" }) -join ", "
    $results += @{ name = "AutomationId coverage"; status = "FAIL"; detail = "Missing: $names" }
}

# ─── Final Screenshot ───
winapp ui screenshot -a $AppPid -o "test-screenshot.png" 2>$null

# ─── Results ───
Write-Host "`nPassed: $pass | Failed: $fail"
$results | Where-Object { $_.status -eq "FAIL" } | ForEach-Object {
    Write-Host "  FAIL: $($_.name) — $($_.detail)" -ForegroundColor Red
}
$results | ConvertTo-Json | Out-File "test-results.json"
if ($fail -gt 0) { exit 1 } else { exit 0 }

What to Test

Write tests for every requirement from the user's prompt:

Requirement type	Test approach
"Has a button that does X"	search to verify exists, invoke to click, wait-for --value to check result
"Text field shows value"	wait-for "TxtName" --value "expected" — works for TextBox, TextBlock, labels
"Status bar contains text"	wait-for "StatusBar" --value "words" --contains — substring match for dynamic content
"Dropdown is set to X"	wait-for "CmbTheme" --value "Dark" — reads the selected item automatically
"Toggle is on/off"	wait-for "TglFeature" --value "On" — reads the toggle state
"Navigation between pages"	invoke nav item, wait-for a page-specific element to appear
"Open file dialog"	invoke trigger, list-windows to find picker HWND, interact with -w
"Save file dialog"	Same as open — find picker with list-windows, set-value filename, invoke Save
"Right-click context menu"	click --right on element, invoke the flyout MenuItem
"Confirmation dialog"	invoke trigger, search for dialog buttons, invoke Primary/Secondary/Close
"Data persists"	Set values, invoke a button (to commit bindings), verify data file on disk (Get-Content + ConvertFrom-Json)
"All controls accessible"	inspect --interactive --json + check all have AutomationId

Step 3: Run and Read Results

.\ui-tests.ps1 -AppPid <PID>

Read test-results.json for structured pass/fail. Only fix code if tests fail.

Step 4: Fix and Rerun (if the user asked for it)

If tests fail:

1. Read the failure details from test-results.json
2. Batch-fix all issues in one pass
3. Rebuild with .\BuildAndRun.ps1 (blocking mode — shows crash info if the fix broke something)
4. Rerun .\ui-tests.ps1 -AppPid <PID> (parse PID from the launched (PID: XXXXX) output)

Maximum 2 fix-and-rerun cycles. If the same tests keep failing after 2 cycles, report them as known issues and move on — do not keep iterating.

Assertion Reference

Use wait-for --value as the primary assertion — it uses a smart fallback chain that reads the right value for any control type:

Control type	--value reads from	Example
TextBlock / Label	Name property	wait-for "LblTitle" --value "Home"
TextBox / NumberBox	ValuePattern	wait-for "TxtName" --value "John"
RichEditBox	TextPattern	wait-for "Editor" --value "Hello"
ComboBox	Selected item (SelectionPattern)	wait-for "CmbTheme" --value "Dark"
ToggleSwitch	Toggle state (On/Off)	wait-for "TglDark" --value "On"
CheckBox	Toggle state (On/Off)	wait-for "ChkAgree" --value "On"

Full assertion commands:

Assertion	Command
Element exists	winapp ui wait-for "Id" -a PID -t 3000
Element has exact value	winapp ui wait-for "Id" -a PID --value "expected" -t 3000
Value contains text	winapp ui wait-for "Id" -a PID --value "words" --contains -t 3000
Element gone	winapp ui wait-for "Id" -a PID --gone -t 3000
Specific property	winapp ui wait-for "Id" -a PID -p IsEnabled --value "True" -t 3000
Button clickable	winapp ui invoke "Id" -a PID (exit code 0)
Set then verify	winapp ui set-value "Id" "text" -a PID then wait-for --value
Screenshot	winapp ui screenshot -a PID -o path.png
Dialog appeared	winapp ui list-windows -a PID --json (check window count)
Right-click menu	winapp ui click "Id" -a PID --right then wait-for menu item
Read raw property	winapp ui get-property "Id" -a PID -p IsEnabled --json
Read current value (no wait)	(winapp ui get-value "Id" -a PID --json | ConvertFrom-Json).text — always pass --json when capturing into a variable (plain stdout can include advisory text like "Auto-selected HWND … from N windows"); otherwise prefer wait-for --value
Scroll item into view	winapp ui scroll-into-view "Id" -a PID — call before wait-for on virtualized ListView/repeater items below the fold
Set keyboard focus	winapp ui focus "Id" -a PID — cleaner than clicking another control to trigger a TextBox LostFocus commit

Testing File Pickers

File/folder pickers (FileOpenPicker, FileSavePicker, FolderPicker) run in a separate PickerHost process but are fully interactable. The picker appears as an owned dialog window.

# 1. Trigger the picker
winapp ui invoke "BtnOpenFile" -a $AppPid

# 2. Find the picker window (it's a dialog owned by the app window)
Start-Sleep 1
$allWindows = winapp ui list-windows -a $AppPid --json 2>$null | ConvertFrom-Json
$picker = $allWindows | Where-Object { $_.title -match "Open|Save" }
$pickerHwnd = $picker.hwnd

# 3. Interact with the picker using -w <HWND>
#    Type a filename:
winapp ui set-value "FileNameControlHost" "test.txt" -w $pickerHwnd
#    Click Open/Save:
winapp ui invoke "Open" -w $pickerHwnd     # or "Save", "Cancel"
#    Or cancel:
winapp ui invoke "Cancel" -w $pickerHwnd

# 4. Verify the app processed the file
winapp ui wait-for "StatusBar" -a $AppPid -p Name --value "opened" -t 3000

Tip: Use winapp ui inspect -w <pickerHwnd> --interactive to discover the picker's controls — they include the folder tree, file list, filename textbox, and Open/Cancel buttons.

Testing Context Menus and Flyouts

MenuFlyouts and ContextFlyouts are fully testable. They appear in the UI automation tree when open.

# 1. Right-click to open a ContextFlyout
winapp ui click "LstItems" -a $AppPid --right
Start-Sleep 0.5

# 2. The flyout MenuItems appear in the tree immediately
#    Find them with inspect or search:
winapp ui inspect -a $AppPid --interactive   # shows MnuCopy, MnuDelete, etc.

# 3. Click a flyout item
winapp ui invoke "MnuCopy" -a $AppPid

# 4. Verify the action
winapp ui wait-for "StatusText" -a $AppPid -p Name --value "Copied" -t 2000

For MenuBar flyouts (File, Edit, View menus):

# Click the menu header to open
winapp ui invoke "FileMenu" -a $AppPid
Start-Sleep 0.5
# Click the sub-item
winapp ui invoke "MenuSaveAs" -a $AppPid

Testing ContentDialogs

ContentDialogs are in-app controls (same window) — they appear directly in the UI tree when shown.

# 1. Trigger the dialog
winapp ui invoke "BtnDelete" -a $AppPid
Start-Sleep 0.5

# 2. The dialog buttons appear in the tree
#    For a standard confirmation dialog:
winapp ui search "Primary" -a $AppPid --json   # finds the primary button
winapp ui invoke "Primary" -a $AppPid           # click "Yes"/"Delete"/"Save"
#    Or:
winapp ui invoke "Secondary" -a $AppPid         # click "No"/"Don't Save"
winapp ui invoke "Close" -a $AppPid             # click "Cancel"

# 3. Wait for dialog to dismiss
winapp ui wait-for "Primary" -a $AppPid --gone -t 3000

Tip: ContentDialog buttons often don't have custom AutomationIds — use inspect to find the actual selector (slug or text match).

Key Gotchas

• set-value does NOT commit default TextBox bindings — WinUI 3 x:Bind TwoWay on TextBox.Text updates the ViewModel on LostFocus by default. UIA set-value changes the text but doesn't trigger focus events. Fix: apps should use UpdateSourceTrigger=PropertyChanged on TextBox bindings (see design skill). If the app doesn't, invoke a button or click another element after set-value to trigger LostFocus.
• Verify persistence via the data file, not UI relaunch — killing and relaunching a packaged app from a test script is fragile (MSIX registration timing, PID issues). Instead, check the data file on disk: Get-Content $dataFile | ConvertFrom-Json and verify expected values.
• Use $AppPid not $Pid — $Pid is a read-only automatic variable in PowerShell
• Use --value without -p — it auto-detects the right UIA pattern (TextPattern → ValuePattern → TogglePattern → SelectionPattern → Name). Only use -p PropertyName --value when you need a specific property like IsEnabled
• File pickers need -w <HWND> — they run in a separate PickerHost process, so -a PID won't find them. Use list-windows to discover the picker HWND first
• Flyouts need a short Start-Sleep after triggering — the menu items appear in the tree asynchronously