submodule-setup

Submodule Setup

Automates the setup of git submodule architecture with fully automated parent-child synchronization via GitHub Actions. Transforms branch-based content separation into always-present submodule directories, eliminating context-switching for agents and developers.

Result:

parent-repo/
├── src/
├── docs/              <- submodule (always present)
└── exports/           <- submodule (always present)

<tool_usage>

Tool Usage Guide

Use these tools for each operation type:

Operation	Tool	Parallelization
Collect parameters	AskUserQuestion	Single call with all parameters
Create GitHub repos	Bash	Parallel - no dependencies between repos
Set secrets	Bash	Parallel - no dependencies between repos
Deploy workflow files	Write	Parallel - independent files
Run git commands	Bash	Sequential within phase, parallel across unrelated ops
Validate setup	Bash	Sequential - each check depends on prior state
Read/write state	Read/Write	As needed for checkpoint operations

Parallel execution rule: If two or more commands have no dependencies between them, execute them in a single message with multiple tool calls. </tool_usage>

<manual_intervention>

Manual Intervention Protocol

Some steps require human action in a browser (cannot be automated via CLI). When you reach these steps:

Handoff Protocol

1. Announce the handoff - Clearly state what manual action is needed
2. Provide direct URL - Give the exact URL to navigate to
3. List exact steps - Number each click/selection in order
4. Specify what to copy back - Tell user what value to provide after
5. Wait explicitly - Use AskUserQuestion to pause until user confirms
6. Verify completion - Run CLI command to confirm the manual step worked

Manual Steps in This Skill

Phase	Manual Action	URL
Phase 3	Create Fine-Grained PAT	https://github.com/settings/personal-access-tokens/new
Phase 6	Configure GitHub Pages (if needed)	https://github.com/{owner}/{repo}/settings/pages

Example Handoff Message

I need you to create a Personal Access Token in the browser.

**URL:** https://github.com/settings/personal-access-tokens/new

**Steps:**
1. Click "Generate new token"
2. Token name: `submodule-sync-myproject`
3. Expiration: Select "90 days"
4. Repository access: Click "Only select repositories"
5. Select: `myorg/parent-repo` (and each submodule repo if using Pull Model)
6. Permissions → Repository permissions → Contents: "Read and write"
7. Click "Generate token"
8. **Copy the token** (starts with `github_pat_`)

Paste the token below when ready.

After Manual Step

Always verify the manual action succeeded:

# After PAT creation - test it works
gh auth status  # or test API call with new token

# After GitHub Pages config
gh api repos/{owner}/{repo}/pages --jq '.source'

</manual_intervention>

<state_schema>

State File Schema

Location: .submodule-setup-state.json in parent repo root. Use Read tool to check for existing state on resume. Use Write tool to update after each phase.

{
  "version": "1.0",
  "started_at": "2026-01-13T10:30:00Z",
  "current_phase": 2,
  "params": {
    "PARENT_REPO": "org/repo",
    "SUBMODULE_NAMES": ["docs", "exports"],
    "TARGET_DIRS": ["docs", "exports"],
    "DEFAULT_BRANCH": "dev",
    "SOURCE_BRANCHES": [],
    "SOURCE_PATHS": []
  },
  "phases": {
    "0": { "status": "completed", "backup_branch": "backup/pre-submodule-setup-20260113-103000" },
    "1": { "status": "completed" },
    "2": { "status": "in_progress", "repos_created": ["org/repo-docs"], "repos_pending": ["org/repo-exports"] }
  },
  "audit_log": [
    { "event": "phase_started", "phase": 0, "timestamp": "2026-01-13T10:30:00Z" },
    { "event": "backup_created", "branch": "backup/pre-submodule-setup-20260113-103000", "timestamp": "2026-01-13T10:30:05Z" }
  ]
}

Resume logic: If state file exists, read current_phase and skip completed phases. Resume from in_progress phase using saved progress data. </state_schema>

<escalation_defaults>

Default Escalation Rules

These patterns apply to all phases unless overridden:

Error Pattern	Action	Max Retries
rate limit	Retry with exponential backoff	3
network error / timeout	Retry	3
already exists	Ask user: use existing, rename, or abort	-
permission denied	Abort with auth instructions	0
not found	Ask user to verify input	-
Unknown error	Abort and report	0

Abort behavior: On abort, update state file with "status": "failed" and error details. Do not delete state file - it aids debugging. </escalation_defaults>

Prerequisites

Before starting, run the validation script:

~/.claude/skills/submodule-setup/scripts/validate-prerequisites.sh

Required:

• GitHub CLI (gh) installed and authenticated
• Git 2.x+
• Repository with push access
• Ability to create fine-grained PAT

## Workflow

Phase 0: Backup  →  Phase 1: Parameters  →  Phase 2: Create Repos  →  Phase 3: PAT/Secrets
                                                                              ↓
Phase 10: Validate  ←  Phase 9: Docs  ←  Phase 8: Hooks  ←  Phase 7: Scripts  ←  Phase 6: Actions
                                                                              ↑
                                    Phase 5: Add Submodules  ←  Phase 4: Migrate (conditional)

<decision_criteria id="phase4"> Phase 4 Decision:

• Execute Phase 4 if: User provided SOURCE_BRANCHES in Phase 1
• Skip Phase 4 if: SOURCE_BRANCHES is empty or user says "start fresh" </decision_criteria>

<resume_behavior> On Resume:

1. Read .submodule-setup-state.json
2. Find phase with "status": "in_progress"
3. Use phase-specific progress data to continue (e.g., repos_created list)
4. If no in_progress phase, start from first "status": "pending" phase </resume_behavior>

---

phase_0_backup Creating backup checkpoint Backup created: {backup_branch} working tree is dirty Working tree has uncommitted changes. Commit or stash before proceeding. script not found Skill not installed correctly. Verify ~/.claude/skills/submodule-setup/ exists. Write to state file: - "current_phase": 0 - "phases.0.status": "completed" - "phases.0.backup_branch": "{created_branch_name}" branch, timestamp

Phase 0: Backup Checkpoint

Before any modifications, create recovery point:

~/.claude/skills/submodule-setup/scripts/create-backup.sh /path/to/parent-repo

This script:

• Verifies working tree is clean (aborts if dirty)
• Creates timestamped backup branch
• Saves rollback instructions to .submodule-setup-backup

**Verification:** Confirm backup branch exists: ```bash git branch --list 'backup/pre-submodule-setup-*' ``` Expected: At least one matching branch. Do not proceed until backup exists.

<error_recovery> If this fails:

• If working tree is dirty: commit or stash changes first
• If script not found: verify skill installation at ~/.claude/skills/submodule-setup/ </error_recovery>

Rollback procedure (if setup fails mid-way):

# Reset parent repo to pre-submodule state
git reset --hard backup/pre-submodule-setup-<timestamp>
git submodule deinit -f --all 2>/dev/null || true
rm -rf .git/modules/* 2>/dev/null || true

# Delete created GitHub repos (if needed)
gh repo delete <org>/<submodule-repo> --yes

See references/troubleshooting.md for detailed rollback scenarios.

---

phase_1_params Collecting configuration parameters Parameters collected for {submodule_count} submodules required parameter missing or unclear Please provide {missing_param}. This is required to continue. Write to state file: - "current_phase": 1 - "phases.1.status": "completed" - "params": { all collected parameters } true All subsequent phases depend on these parameters. Must save before proceeding. submodule_count, has_source_branches, timestamp

Phase 1: Parameter Collection

Use AskUserQuestion tool to collect all parameters in a single call:

Parameter	Example	Notes
PARENT_REPO	myorg/myproject	Full GitHub path
SUBMODULE_NAMES	docs exports	Space-separated
TARGET_DIRS	docs exports	Where to mount (usually same as names)
DEFAULT_BRANCH	dev	Branch to track
SOURCE_BRANCHES	docs-external,n8n-exports	Only if extracting (leave empty for fresh start)
SOURCE_PATHS	docs-external/,exports/	Paths within branches (only if extracting)

**Verification:** All required parameters have values. `SOURCE_BRANCHES` determines whether Phase 4 executes.

<error_recovery> If unclear: Ask user to clarify. Do not assume values for SOURCE_BRANCHES - this controls Phase 4 execution. </error_recovery>

---

phase_2_create_repos Creating {submodule_count} repositories on GitHub All repositories created successfully error contains "already exists" Repository {repo_name} already exists. Choose: use existing, rename, or abort? Use existing repo Add suffix (e.g., -v2) Abort setup error contains "permission denied" Cannot create repo. Run `gh auth status` and verify org membership. each repo creation - "phases.2.status": "in_progress" - "phases.2.repos_created": ["list", "of", "created"] - "phases.2.repos_pending": ["remaining", "repos"] On resume, skip repos in repos_created, continue with repos_pending. repo_name, visibility, timestamp

Phase 2: Create Submodule Repos

Execute in parallel - create all repos simultaneously with multiple Bash tool calls in one message:

# For each submodule (run these in parallel)
gh repo create <org>/<parent-name>-<submodule> \
  --private \
  --description "Submodule: <description>"

Example (execute both in parallel):

gh repo create myorg/myproject-docs --private --description "External documentation"
gh repo create myorg/myproject-exports --private --description "Exported workflows"

**Verification:** For each repo, confirm creation succeeded: ```bash gh repo view / --json name -q '.name' ``` Expected: Returns repo name without error. Do not proceed to Phase 3 until all repos exist.

<error_recovery> If this fails:

• "already exists": Confirm with user whether to use existing repo or choose different name
• "permission denied": Run gh auth status, verify org permissions
• "not found" (org): Verify org name spelling, check membership </error_recovery>

---

phase_3_secrets Configuring PAT and secrets for {repo_count} repositories Secrets configured for all repositories error contains "permission denied" or "not authorized" Cannot set secrets. Token needs admin access to repository settings. Check PAT permissions. PAT not provided Please create a fine-grained PAT with the specified permissions and provide it. each secret set - "phases.3.status": "in_progress" - "phases.3.secrets_set": ["repo1", "repo2"] - "phases.3.secrets_pending": ["repo3"] repo_name, secret_name, timestamp Never log secret values

Phase 3: PAT and Secrets Setup

Step 1: Create Fine-Grained PAT (Manual - Browser Required)

This step requires human action. Use AskUserQuestion with this handoff:

I need you to create a Personal Access Token in your browser.

**Open this URL:** https://github.com/settings/personal-access-tokens/new

**Follow these steps exactly:**

1. Click **"Generate new token"** (fine-grained)
2. **Token name:** `submodule-sync-{PARENT_REPO_NAME}`
3. **Expiration:** Select "90 days" (set a calendar reminder!)
4. **Repository access:** Click "Only select repositories"
5. **Select repositories:**
   - `{ORG}/{PARENT_REPO}` (required)
   - For Pull Model only: also select each submodule repo
6. **Permissions** → Repository permissions:
   - **Contents:** Read and write
   - **Workflows:** Read and write (optional but recommended)
7. Click **"Generate token"** at the bottom
8. **IMPORTANT:** Copy the token immediately (starts with `github_pat_`)
   - You won't be able to see it again!

**Paste the token when ready** (I'll store it securely as a GitHub secret).

Wait for user to provide the PAT before proceeding.

Step 2: Verify PAT Works

After receiving the PAT, verify it has correct permissions:

# Test PAT can access parent repo
# Use read -rs to avoid token in shell history
read -rs PAT && echo
GH_TOKEN="$PAT" gh api repos/{ORG}/{PARENT_REPO} --jq '.full_name'

If this fails, guide user to check token permissions.

Step 3: Set Secrets

Execute in parallel - set all secrets simultaneously.

Option A (recommended): Use interactive prompt - no token in history:

gh secret set PARENT_REPO_PAT --repo <org>/<parent>
gh secret set PARENT_REPO_PAT --repo <org>/<submodule-1>
gh secret set PARENT_REPO_PAT --repo <org>/<submodule-2>
# Each prompts for the secret value interactively

Option B: If automating with a variable (already captured securely):

# PAT must already be in $PAT variable (from read -rs above)
printf '%s' "$PAT" | gh secret set PARENT_REPO_PAT --repo <org>/<parent>
printf '%s' "$PAT" | gh secret set PARENT_REPO_PAT --repo <org>/<submodule-1>
printf '%s' "$PAT" | gh secret set PARENT_REPO_PAT --repo <org>/<submodule-2>
unset PAT  # Clear from environment when done

Security note: Never type the PAT directly in a command - it will be recorded in shell history. Use read -rs to capture it into a variable first, or rely on gh secret set's interactive prompt.

**Verification:** List secrets for each repo: ```bash gh secret list --repo / ``` Expected: `PARENT_REPO_PAT` appears in list for parent and all submodule repos.

<error_recovery> If this fails:

• "secret not set": Verify PAT was copied correctly (no trailing whitespace)
• "permission denied": User's GitHub account needs admin access to repo settings
• "Resource not accessible": PAT doesn't have access to this repo - user must regenerate with correct repo selection </error_recovery>

---

phase_4_migration Migrating content from {source_count} source branches Content migrated to all submodule repositories error contains "branch not found" or "pathspec" Source branch '{branch}' not found. Verify branch name with `git branch -r`. error contains "path not found" or "not a valid object" Path '{path}' not found in branch '{branch}'. Verify with `git ls-tree origin/{branch}`. error contains "permission denied" on push Cannot push to submodule repo. Verify SSH key or use HTTPS with PAT. each submodule migration - "phases.4.status": "in_progress" - "phases.4.migrated": ["docs"] - "phases.4.pending": ["exports"] On resume, skip submodules in migrated list. submodule_name, source_branch, commit_sha, timestamp

Phase 4: Content Migration (If Extracting)

<decision_criteria> Skip this phase if: SOURCE_BRANCHES from Phase 1 is empty or user specified "start fresh" </decision_criteria>

For each submodule with source branch (execute sequentially per submodule):

# Extract from branch
cd /path/to/parent-repo
rm -rf /tmp/extract && mkdir -p /tmp/extract
git archive origin/<source-branch>:<source-path> | tar -x -C /tmp/extract/

# Clone and populate new repo
cd /tmp
git clone [email protected]:<org>/<submodule-repo>.git
cd <submodule-repo>
git checkout -b <default-branch>
cp -r /tmp/extract/* .
git add .
git commit -m "feat: initial content from <source-branch>"
git push -u origin <default-branch>

# Set default branch
gh repo edit <org>/<submodule-repo> --default-branch <default-branch>

**Verification:** For each submodule repo: ```bash gh api repos///branches/ -q '.name' ``` Expected: Returns branch name. Also verify content exists: ```bash gh api repos///contents -q '.[].name' | head -5 ``` Expected: Lists files from extracted content.

<error_recovery> If this fails:

• "branch not found": Verify source branch name with git branch -r
• "path not found": Verify source path exists in branch with git ls-tree origin/<branch>
• "permission denied" on push: Verify SSH key or use HTTPS with PAT </error_recovery>

---

phase_5_add_submodules Adding {submodule_count} submodules to parent repository All submodules added and committed error contains "already exists" or "already a submodule" Directory '{dir}' already exists. Remove existing or use --force? Remove directory and retry Use --force flag Abort setup error contains "not a git repository" Submodule repo URL is invalid. Verify repo exists at specified URL. each submodule add - "phases.5.status": "in_progress" - "phases.5.added": [{"name": "docs", "sha": "abc123"}] - "phases.5.pending": ["exports"] submodule_name, target_dir, commit_sha, timestamp

Phase 5: Add Submodules to Parent

cd /path/to/parent-repo
git checkout <default-branch>

# For each submodule (execute sequentially - git operations require serial execution)
git submodule add -b <default-branch> \
  [email protected]:<org>/<submodule-repo>.git \
  <target-dir>

git commit -m "feat(repo): add submodules for <list>

Migrate from branch-based separation to submodule architecture.
Enables agents to access content without branch switching."

**Verification:** ```bash git submodule status ``` Expected: Each submodule listed with commit hash (no `-` prefix indicating uninitialized).

<error_recovery> If this fails:

• "already exists": Remove existing directory first, or use --force
• "not a git repository": Verify submodule repo URL is correct
• Detached HEAD in submodule: Run git submodule update --remote </error_recovery>

---

phase_6_workflows Deploying GitHub Actions workflows All workflow files deployed

<decision_criteria id="phase6-sync-model"> Sync Model Selection: Ask the user which sync model to use:

Model	Use When	PAT Scope
Push Model (Recommended)	Any submodule is private, or you want minimal PAT scope	Parent repo only
Pull Model	All submodules are public AND you prefer simpler setup	Parent + all submodule repos

• Push Model: Each submodule pushes its SHA to parent via repository_dispatch. Parent updates its gitlink without cloning submodules. Works with private repos using only parent repo access.
• Pull Model: Parent periodically pulls latest from all submodules. Requires PAT with read access to every submodule repository.

Save choice to state: "phases.6.sync_model": "push" or "phases.6.sync_model": "pull" </decision_criteria>

push rejected with "refusing to allow" or "workflow" PAT lacks 'workflows' permission. Update token at GitHub Settings → Developer settings. each workflow deployed - "phases.6.status": "in_progress" - "phases.6.sync_model": "push|pull" - "phases.6.deployed": ["parent", "docs"] - "phases.6.pending": ["exports"] repo_name, workflow_file, sync_model, timestamp

Phase 6: Deploy GitHub Actions

Step 1: Select Sync Model

Use AskUserQuestion tool to determine sync model:

• If ANY submodule is private: recommend Push Model
• If ALL submodules are public: offer choice (Push Model still recommended for simplicity)

Step 2: Parent Repo Workflow

For Push Model: Use Read tool to get template from ~/.claude/skills/submodule-setup/assets/update-submodules-push.yml.

For Pull Model: Use Read tool to get template from ~/.claude/skills/submodule-setup/assets/update-submodules.yml.

Use Write tool to create .github/workflows/update-submodules.yml:

• Replace %DEFAULT_BRANCH% with actual branch

Step 3: Submodule Repo Workflows

Execute in parallel - write all workflow files simultaneously:

For each submodule, use Write tool to create .github/workflows/notify-parent.yml in the submodule directory:

• Read template from ~/.claude/skills/submodule-setup/assets/notify-parent.yml
• Replace %PARENT_REPO% with <org>/<parent-repo>
• Replace %DEFAULT_BRANCH% with actual branch
• Replace %TARGET_DIR% with submodule path in parent repo (e.g., apps/docs)

Then commit and push each submodule's workflow.

**Verification:** Confirm workflow files exist: ```bash # Parent repo ls -la .github/workflows/update-submodules.yml

Each submodule (check via API since we may not be in those directories)

gh api repos///contents/.github/workflows/notify-parent.yml -q '.name'

Expected: Files exist and contain correct branch names.
</verification>

<error_recovery>
**If this fails:**
- File not created: Verify `.github/workflows/` directory exists, create if needed
- Push rejected: Verify PAT has `workflows` permission
</error_recovery>
</phase>

---

<phase name="7" title="Deploy Local Scripts">

<progress>
  <status_key>phase_7_scripts</status_key>
  <on_start>Creating local helper scripts</on_start>
  <on_complete>Helper scripts deployed and made executable</on_complete>
  <trackable_items>
    <item key="scripts_created" type="counter" target="2"/>
  </trackable_items>
</progress>

<escalation>
  <retry max="1">
    <condition>directory does not exist</condition>
    <action>Create scripts/ directory, then retry</action>
  </retry>
</escalation>

<checkpoint>
  <on_complete>
    - "phases.7.status": "completed"
    - "phases.7.scripts": ["setup-dev.sh", "check-nested-repos.sh"]
  </on_complete>
</checkpoint>

<audit>
  <event name="script_deployed">
    <fields>script_name, timestamp</fields>
  </event>
</audit>

## Phase 7: Deploy Local Scripts

Use `Read` tool to get templates, `Write` tool to create scripts, then `Bash` for chmod:

**setup-dev.sh:**
- Read template from `~/.claude/skills/submodule-setup/scripts/setup-dev.sh`
- Replace `%SUBMODULES%` → actual submodule list (space-separated)
- Replace `%DEFAULT_BRANCH%` → actual branch
- Write to `scripts/setup-dev.sh`

**check-nested-repos.sh:**
- Read template from `~/.claude/skills/submodule-setup/scripts/check-nested-repos.sh`
- Replace `%SUBMODULES%` → actual submodule list (space-separated)
- Write to `scripts/check-nested-repos.sh`

Make executable:
```bash
chmod +x scripts/setup-dev.sh scripts/check-nested-repos.sh

**Verification:** ```bash ls -la scripts/*.sh | grep -E 'setup-dev|check-nested' ``` Expected: Both files listed with execute permission (`-rwxr-xr-x`).

<error_recovery> If this fails:

• "No such file or directory": Create scripts/ directory first
• Permission denied on chmod: Check filesystem permissions </error_recovery>

---

phase_8_hooks Configuring Claude Code hooks Claude Code hooks configured settings file exists with different content Existing .claude/settings.local.json found. Merge with new hooks or overwrite? Merge (preserve existing settings) Overwrite (replace entirely) Skip hook configuration - "phases.8.status": "completed" - "phases.8.hooks_configured": true merged_or_new, timestamp

Phase 8: Claude Code Hooks (Optional)

Ask user if they want Claude Code hooks configured. If yes:

Use Read tool to check if .claude/settings.local.json exists.

• If exists: read and merge with new hooks
• If not: create new file

Use Write tool to create or update .claude/settings.local.json:

{
  "permissions": {
    "allow": [
      "Bash(git add:*)",
      "Bash(git commit:*)",
      "Bash(git push)"
    ]
  },
  "hooks": {
    "PostToolUse": [
      {
        "matcher": "Bash(git commit:*)",
        "hooks": [
          {
            "type": "command",
            "command": "scripts/check-nested-repos.sh"
          }
        ]
      }
    ],
    "Stop": [
      {
        "hooks": [
          {
            "type": "command",
            "command": "scripts/check-nested-repos.sh --end-of-task"
          }
        ]
      }
    ]
  }
}

**Verification:** ```bash grep -c "check-nested-repos" .claude/settings.local.json ``` Expected: Returns 2 (appears twice in hooks config).

<error_recovery> If this fails:

• JSON syntax error: Validate JSON before writing
• File exists with different content: Merge with existing settings, don't overwrite </error_recovery>

---

phase_9_docs Updating project documentation Documentation updated with submodule instructions README.md does not exist Create README.md with submodule section - "phases.9.status": "completed" - "phases.9.docs_updated": true file_updated, timestamp

Phase 9: Update Documentation

Add submodule documentation to project's README.md or CLAUDE.md.

Use Read tool to get template from ~/.claude/skills/submodule-setup/assets/README-template.md. Use Read tool to get existing README.md content. Use Edit tool to append submodule section to existing README (do not overwrite).

Key sections to include:

• Repository structure table (directories → repos → purposes)
• Setup instructions for new clones
• Working with submodules workflow
• CI/CD checkout note (submodules: recursive)

**Verification:** ```bash grep -c "submodule" README.md ``` Expected: Multiple matches indicating submodule documentation was added.

<error_recovery> If this fails:

• README.md doesn't exist: Create it with submodule section
• Merge conflict with existing content: Use Edit tool to append, don't overwrite </error_recovery>

---

phase_10_validate Running validation checklist (5 checks) Validation complete: {passed}/{total} checks passed true Validation failures are informational. Report all results, don't abort on individual check failures. - "phases.10.status": "completed" - "phases.10.validation_results": { "submodules_initialized": true, "git_config_applied": true, "push_flow_works": false, "fail_fast_script_works": true, "cleanup_successful": true } checks_passed, checks_failed, details, timestamp

Phase 10: Validation

Execute validation checklist sequentially:

# 1. Submodules initialized
git submodule status
# Expected: No '-' prefix (initialized)

# 2. Git config applied
git config --get submodule.recurse        # Expected: true
git config --get push.recurseSubmodules   # Expected: on-demand

# 3. Test push flow
cd <submodule>
echo "test" >> test.md
git add . && git commit -m "test: verify sync"
git push
cd ..
# Wait 2-3 minutes, then:
git fetch && git log --oneline -3
# Expected (Pull Model): "chore(submodules): auto-update to latest [skip ci]"
# Expected (Push Model): "chore: update <submodule-name> submodule"

# 4. Test fail-fast script
cd <submodule>
echo "uncommitted" >> temp.md
cd ..
./scripts/check-nested-repos.sh
# Expected: Exit 1 with "NESTED REPOS: ACTION REQUIRED"

# 5. Cleanup (local files only)
cd <submodule> && rm test.md temp.md 2>/dev/null; git checkout .; cd ..
# Note: The "test: verify sync" commit remains in submodule history.
# This is acceptable - it verifies the sync actually works end-to-end.

**Final success criteria:** - [ ] All submodules show commit hash (no `-` prefix) in `git submodule status` - [ ] Push to submodule triggers parent auto-update within 3 minutes - [ ] `check-nested-repos.sh` detects uncommitted changes - [ ] All workflow files deployed to correct repos

---

Finalization

After Phase 10 completes successfully:

1. Update state file with final status:

{
  "current_phase": 10,
  "phases.10.status": "completed",
  "completed_at": "ISO8601 timestamp"
}

2. Commit all changes to parent repo:

git add .
git commit -m "feat(repo): complete submodule setup

- Added submodules: <list>
- Configured GitHub Actions for auto-sync
- Added helper scripts and documentation"
git push

3. Optionally remove state file (or keep for audit):

rm .submodule-setup-state.json  # Optional

---

Quick Reference

Task	Command
Clone with submodules	git clone --recurse-submodules <url>
Init after clone	./scripts/setup-dev.sh
Update submodules	git submodule update --remote
Check submodule status	git submodule status
Check for uncommitted	./scripts/check-nested-repos.sh
Check for unpushed	./scripts/check-nested-repos.sh --end-of-task
Checkout submodule branch	cd <submodule> && git checkout <branch>
Force re-init	git submodule update --init --recursive --force
Resume interrupted setup	Read .submodule-setup-state.json and continue from current_phase

Resources

Scripts

• scripts/validate-prerequisites.sh - Run before starting setup
• scripts/create-backup.sh - Create backup checkpoint before modifications
• scripts/setup-dev.sh - Template for new clone initialization
• scripts/check-nested-repos.sh - Template for commit validation

Templates

• assets/update-submodules.yml - GitHub Action for parent repo (Pull Model)
• assets/update-submodules-push.yml - GitHub Action for parent repo (Push Model)
• assets/notify-parent.yml - GitHub Action for each submodule
• assets/notify-dependent.yml - GitHub Action for cross-repo notifications
• assets/README-template.md - Documentation template for project README

References

• references/troubleshooting.md - Common issues and solutions
• references/decision-rationale.md - Why submodules over alternatives