offensive-mitigations

SKILL: Modern Kernel Exploit Mitigations

Metadata

• Skill Name: security-mitigations
• Folder: offensive-mitigations
• Source: https://github.com/SnailSploit/offensive-checklist/blob/main/mitigations.md

Description

Security mitigation reference and bypass catalog: ASLR, DEP/NX, RELRO, stack canaries, CFI, sandboxing, seccomp. Covers both detection of enabled mitigations and known bypass techniques. Use when assessing target hardening or planning exploit mitigation bypasses.

Trigger Phrases

Use this skill when the conversation involves any of: mitigations, ASLR bypass, DEP bypass, NX bypass, RELRO, stack canary bypass, CFI bypass, sandbox bypass, seccomp bypass, mitigation detection, checksec

Instructions for Claude

When this skill is active:

1. Load and apply the full methodology below as your operational checklist
2. Follow steps in order unless the user specifies otherwise
3. For each technique, consider applicability to the current target/context
4. Track which checklist items have been completed
5. Suggest next steps based on findings

---

Full Methodology

Modern Kernel Exploit Mitigations

Memory-safety & Isolation

Kernel Address Space Layout Randomization (KASLR)

• Randomizes memory addresses where the kernel and its components are loaded.
• Makes it difficult for attackers to predict kernel code and data locations.

Bypass Techniques

• Information Leaks: Exploiting vulnerabilities (e.g., uninitialized memory, side-channels) to leak kernel pointers and calculate the base address.
• Side-Channel Attacks: Using timing, cache, or other microarchitectural side channels to infer memory layout.
  • Prefetch Cache Timing: Measures access speed across the kASLR range (0xfffff80000000000 to 0xfffff80800000000, ~0x8000 iterations with 0x100000 alignment). The fastest access indicates a cached address, revealing the actual kernel base. Uses rdtscp for timing, mfence for memory barriers, and prefetchnta/prefetcht2 for cache manipulation.
• Targeting Non-Randomized Regions: Exploiting data or code segments that are not fully randomized.
• Brute-Force: Feasible in environments with limited entropy (e.g., some 32-bit systems or specific configurations).
• Intel LAM: Linear Address Masking support exists on recent kernels/CPUs but may be disabled by default. Verify with kernel config, boot params, and CPU flags on your target.

Kernel Page Table Isolation (KPTI)

• Linux:
  • Separates user-space and kernel-space page tables.
  • Mitigates the Meltdown vulnerability by preventing user-space access to kernel memory.

Bypass Techniques

• Side-Channel Attacks: Exploiting microarchitectural side channels (e.g., TLB timing, cache attacks) that leak information across the isolation boundary.
• Hardware Vulnerabilities: Exploiting CPU vulnerabilities (e.g., L1TF, MDS) that can bypass page table separation.
• Implementation Flaws: Bugs in the KPTI implementation itself.

Practitioner

• Linux: check status via /sys/devices/system/cpu/vulnerabilities/* and dmesg | grep -i kpti.
• Windows: verify meltdown/KVA shadowing with Get-SpeculationControlSettings PowerShell script from Microsoft.

Supervisor Mode Access Prevention (SMAP)

• Linux:
  • Hardware feature preventing unintended kernel access to user-space memory.
  • Protects against attacks exploiting improper memory accesses.

Bypass Techniques

• ROP/JOP Gadgets: Finding instruction sequences (gadgets) within kernel code that disable SMAP temporarily (e.g., via stac instruction) before accessing user memory.
• Data-Only Attacks: Attacks that achieve their goal without directly accessing user-space data from the kernel inappropriately.
• Kernel Information Leaks: Combining with KASLR bypasses to find suitable gadgets.

Practitioner

• Linux: confirm with grep smap /proc/cpuinfo and cat /proc/cpuinfo | grep 'smep\|smap'.
• Check CR4 at runtime with rdmsr/wrmsr tools or lscpu -e on supported systems.

Supervisor Mode Execution Protection (SMEP)

• Linux/Windows:
  • Hardware feature preventing execution of user-space code when in supervisor mode.
  • Located in bit 20 of the CR4 control register.
  • Blocks certain privilege escalation attacks that rely on executing shellcode in user-mode memory.

Bypass Techniques

• ROP/JOP Chains: Constructing code reuse chains entirely from existing kernel code, avoiding execution of user-space code.
• Data-Only Attacks: Exploiting vulnerabilities without needing to execute shellcode (e.g., overwriting kernel data structures).
• Disabling SMEP: Finding gadgets or techniques to modify the CR4 control register to disable SMEP.
• Type Confusion Exploits: Using type confusion vulnerabilities to gain control flow and build ROP chains for SMEP bypass.
• Page Table Manipulation: Modifying page table entries (PTEs) to change user pages to supervisor pages, making user-space code executable in kernel context.
• Write-What-Where Primitives: Using arbitrary write vulnerabilities to modify CR4 register or page table structures.

Practitioner

• Linux: grep smep /proc/cpuinfo; verify effective state via dmesg | grep -i smep.
• Windows: SMEP is enforced when Memory Integrity/HVCI is enabled on modern systems.

Kernel Data Protection (KDP)

• Windows:
  • Marks certain kernel memory regions as read-only.
  • Prevents unauthorized modification of critical kernel data structures.

Practitioner

• Check with Get-CimInstance -ClassName Win32_DeviceGuard and System Information → Device Guard properties for KDP/HVCI/VBS.

Memory Integrity (Core Isolation)

• Windows:
  • Uses virtualization and HVCI to prevent malicious code alteration.
  • Guards against code injection or execution in kernel mode.

Practitioner

• Enable/verify: Windows Security → Device Security → Core isolation details.
• PowerShell: Get-ItemProperty -Path HKLM:\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity | Select-Object Enabled.

Read-Only Data Sections (RODATA)

• Linux:
  • Marks specific kernel memory regions as read-only.
  • Prevents modification of critical data structures and code.

Hardened Usercopy

• Linux:
  • Adds boundary checks to memory copy operations between user and kernel space.
  • Prevents buffer overflows and memory corruption during copy operations.

Memory Tagging Extension (MTE)

• Linux (ARM):
  • Hardware-assisted memory safety feature to detect memory corruption bugs.
  • Mitigates use-after-free and buffer overflows at a hardware level.
  • Adopted as a production security feature in Android 16 (March 2025) with both asynchronous and synchronous detection modes available for apps.

How MTE Works

• 4-bit Tags: Each 16-byte memory allocation receives a random 4-bit tag (values 0-15)
• Pointer Tagging: Upper bits of pointers store the allocation tag
• Tag Checking: Hardware validates pointer tag matches memory tag on every dereference
• Fault on Mismatch: Invalid access triggers SIGSEGV (sync mode) or logs asynchronously (async mode)

Bypass Techniques

• Tag Collision (Probabilistic): With only 4-bit tags (16 possible values), collision probability is high
  • Increase entropy with larger allocation pools; Android 16 uses tag rotation heuristics.
• Untagged Memory Regions: Not all memory is MTE-protected
  • Enable MTE on stack via prctl(PR_MTE_TCF_SYNC, PR_TAGGED_ADDR_ENABLE).
• Asynchronous Mode Exploitation: Android's async mode delays fault reporting for performance
  • Use synchronous mode (MTE_mode=sync) for security-critical apps.
• Integer Overflow in Tag Calculation: MTE tags are derived from allocation size; overflow can corrupt tags
• Kernel-Space Bypass: MTE only protects userspace by default
  • Kernel allocations (kmalloc, vmalloc) don't use MTE (Android 16, Linux 6.8)
  • Kernel exploit primitives (KASLR leak, arbitrary write) unaffected
  • Syscall buffer handling may not validate tags
• JIT Code Execution: JIT-compiled code can bypass MTE checks

; Assembly gadget to create untagged pointer
mov x0, xzr          ; Zero out tag bits
orr x0, x0, #0x1000  ; Set address without tag
ldr x1, [x0]         ; Load from untagged pointer (no MTE check)

Exploitation Workflow:

1. Leak a tagged pointer
2. Strip tag bits (mask upper 8 bits)
3. Use untagged pointer for memory operations
4. MTE doesn't validate untagged accesses in some contexts

Practitioner

• Android: enable per‑app via Developer Options or adb shell setprop persist.device_config.runtime_native_boot.mte_mode sync (device‑specific).
• Linux: compile with CONFIG_ARM64_MTE and use prctl(PR_SET_TAGGED_ADDR_CTRL, ...) from user space.
• Verify MTE status: cat /proc/cpuinfo | grep mte and check HWCAP2_MTE in getauxval(AT_HWCAP2)
• Android 16+ apps: opt-in via manifest <application android:memtagMode="sync">

Intel Linear Address Masking (LAM)

Intel allows software to use upper address bits for metadata, similar to ARM's Top Byte Ignore (TBI).

How LAM Works

• LAM57: Uses bits 62:57 (6 bits) for tags in 5-level paging
• LAM48: Uses bits 62:48 (15 bits) for tags in 4-level paging
• Hardware Masking: CPU ignores tagged bits during address translation
• Use Cases: Memory tagging, capability systems, garbage collection metadata
• Vulnerability Classes:

1. Pointer Forge: Attackers can craft tagged pointers without validation
2. Info Leak Bypass: Some sanitizers only check canonical addresses; LAM-tagged pointers pass checks
3. Address Confusion: Software assuming canonical addresses may mishandle LAM pointers

Memory Sealing

• Linux:
  • mseal() permanently seals selected VMAs so permissions/mappings can no longer change—even by the owner (verify kernel version and libc support on your target).
  • Adopted by projects such as Chrome/glibc/BPF tool‑chains to seal JIT pages, locking down GOT/PLT and eBPF JIT regions (version‑specific; verify).

Bypass Techniques

• Time‑of‑use Window: Exploits must succeed before sealing.
• Data‑only Abuse: Still possible if the mapping remains writable.
• Kernel Flaws: Bugs in the mseal() path could bypass a seal.

Practitioner

• Verify mseal availability via grep -R sys_mseal /proc/kallsyms or kernel symbols.
• Userland: prctl(PR_MSEAL, ...) (glibc 2.41+ headers), check errno for ENOSYS on older kernels.

Privileged Access Never (PAN)

• Linux (ARM):
  • Hardware feature preventing direct kernel access to user-space memory.
  • Similar concept to SMAP on x86, prevents certain data leakage/corruption bugs.

Kernel DMA Protection

• Windows:
  • Uses IOMMU/VT-d to protect against malicious peripherals performing DMA attacks.
  • Prevents unauthorized memory access via hardware devices.

Pluton Security Processor

• Windows:
  • Microsoft Pluton is increasingly deployed with newer platforms, replacing or augmenting discrete TPM 2.0 and hardware‑binding BitLocker keys, Secure Boot, and HVCI policies. Check OEM/SKU documentation for Copilot+ requirements.

Practitioner

• Check Pluton state in Device Manager → Security devices, or tpm.msc shows Pluton‑backed TPM if present.

Memory Protection Keys (MPK)

• Linux:
  • Provides per-page memory permissions using hardware keys.
  • Allows fine-grained control over memory access rights.

Bypass Techniques

• PKRU Register Manipulation: Using gadgets to modify the Protection Key Rights Register.
• Unprotected Memory: Targeting memory regions not protected by MPK.
• Implementation Bugs: Exploiting flaws in the MPK implementation.
• Side-Channel Attacks: Using side channels to infer protected memory contents.

Protection Keys for Supervisor (PKS)

• Linux/Intel:
  • Extends PKU to supervisor pages; the kernel flips page permissions via wrmsr PKS_MSC* without TLB flushes (Sapphire‑Rapids+).
  • Landed upstream in Linux 6.12.

Bypass Techniques

• ROP/JOP WRMSR Gadgets that flip PKS bits.
• Unprotected Regions outside a PKS domain.
• CPU Errata undermining isolation.

Practitioner

• Linux: enable with CONFIG_X86_PKS; verify via dmesg | grep -i pks and /proc/cpuinfo flags.

Zero-Page Memory Allocation

• Linux/Windows:
  • Ensures memory pages are zeroed before allocation.
  • Prevents leakage of residual data.

Zero-Page Mapping Removal

• Linux:
  • Removes zero page mapping to prevent NULL pointer dereference exploits.
  • Enhances memory safety.

Init-On-Alloc and Init-On-Free and Init-Stack-All-Zero

• Linux:
  • Automatically zeroes memory when allocated or freed.
  • Prevents use-after-free and information leakage.

TPM Bus Encryption

• Linux:
  • Recent kernels add support for stronger TPM transports over SPI/I²C on some platforms. Feature availability and defaults vary; verify in dmesg and driver configs for your device.

Practitioner

• Verify with dmesg | grep -i tpm and kernel config CONFIG_TCG_TIS_SPI/_I2C options; firmware must expose supported transports.

Memory Safety Initiatives

Rust in the Linux Kernel

• First‑class Rust support landed in Linux 6.1 (December 2022) and was declared production‑ready with Linux 6.6 (October 2023).
• In‑tree Rust drivers (e.g., NVMe, DRM simple‑display, Wi‑Fi) have so far exhibited zero memory‑safety bugs under continuous fuzzing, demonstrating the practical security benefit of memory‑safe languages.
• Ongoing work aims to extend Rust usage into networking, Android GKI modules, and scheduler subsystems, further shrinking the kernel's attack surface.

Safer Windows Drivers with C++20 and Rust

• Starting in Windows 11 23H2, the Windows Driver Framework (WDF) officially supports both modern C++20 and a Rust projection (windows‑drivers‑rs) that wrap KMDF/WDF APIs with lifetime‑safe abstractions.
• Hardware vendors can now obtain WHQL signatures for C++20 or Rust kernels drivers, eliminating common lifetime and IRQL‑misuse bugs without sacrificing performance.

CHERI / Morello (Experimental Capability Hardware)

• Arm's Morello evaluation platform (2022‑2025) runs a CHERI‑enabled Linux kernel that enforces pointer capabilities in user and kernel space, providing hardware‑enforced spatial and temporal memory safety.
• Although experimental, CHERI demonstrates a plausible post‑2025 path toward fundamentally safer C/C++ code with architectural support.

memfd_secret (userland secret memory)

• Linux:
  • memfd_secret (Linux 5.14+) provides user‑mode pages hidden from other processes and the kernel direct mappings
  • Useful for protecting keys and ROP staging from accidental exposure; verify support via kernel config and memfd_secret(2)

Virtualization-Based Security Enhancements

Virtualization-Based Security (VBS)

• Windows:
  • Creates an isolated, secure memory region using hardware virtualization.
  • Protects sensitive system components and data from malware and exploits.

Bypass Techniques

• Hypervisor Vulnerabilities: Exploiting bugs in the underlying hypervisor (Hyper-V) to escape the VBS container.
• Misconfiguration: Weaknesses in VBS configuration or deployment.
• Physical Access: Hardware-level attacks (e.g., DMA attacks if not mitigated by Kernel DMA Protection).
• Compromised Signed Components: Exploiting vulnerabilities in trusted components running within VBS.

Practitioner

• Confirm VBS/HVCI: Core isolation settings or PowerShell Get-CimInstance -ClassName Win32_DeviceGuard (look for VirtualizationBasedSecurityStatus and SecurityServicesConfigured).

AMD Secure Encrypted Virtualization – Secure Nested Paging (SEV‑SNP)

• Linux guest support since 6.11; provides full memory encryption + integrity with an SVSM.
• Shipping today in major cloud "confidential VM" SKUs.

Intel Trust Domain Extensions (TDX)

• Guest driver landed in 6.11; host enablement queued for 6.16.
• Protects guest memory against a compromised hypervisor.

Practitioner

• Cloud: verify TDX/SEV‑SNP instance type (Azure DCasv5/ECasv5, GCP C3, AWS C7g variants); attest via platform‑specific tools (e.g., az confcom attestation).

Arm Confidential Compute Architecture (CCA) Realms

• Realm VM support merged in 6.13 for Arm v9 CPUs, giving encrypted, isolated guest environments.

Hypervisor-Enforced Code Integrity (HVCI)

• Windows:
  • Uses VBS to enforce code integrity checks on kernel-mode drivers and binaries.
  • Ensures only signed and verified code can execute in kernel mode.

Bypass Techniques

• Signed Malicious Drivers: Obtaining signing certificates (stolen or illicitly acquired) to sign malicious code.
• Exploiting Allowed Drivers: Finding vulnerabilities in legitimate, signed drivers already running on the system ("Bring Your Own Vulnerable Driver" - BYOVD).
• Hypervisor Vulnerabilities: Exploiting the underlying hypervisor (see VBS bypasses).
• Configuration Issues: Weaknesses in Code Integrity policies.

Mode Based Execution Control (MBEC)

• Windows:
  • Ensures driver code can only be executed in kernel mode.
  • Available in hardware and software (emulated) forms.
  • Prevents user-mode execution of kernel code.

Kernel Mode Code Integrity (KMCI)

• Windows:
  • Ensures kernel pages can only become executable with proper signing.
  • Enforces driver signing enforcement and vulnerable driver blocklists.
  • Implements software SMEP (Supervisor Mode Execution Prevention).
  • DriverSiPolicy.p7b now refreshes weekly via Windows Update and MEM Configuration Manager, accelerating the BYOVD blocklist cadence.

User Mode Code Integrity (UMCI)

• Windows:
  • Ensures user mode pages can only become executable with proper signing.
  • CI validates the signaturees of EXE and DLL before allowing them to load.
  • Enforces protected processes and protected process light signature requirements
  • Enforces /INTEGRITYCHECK for FIPS 140-2 modules
  • Exposed to consumers as Smart App Control and businesses as App Control for Business.
  • Part of the Device Guard technology stack.

Windows Defender System Guard

• Windows:
  • Monitors system integrity during boot and runtime.
  • Protects against rootkits and bootkits by verifying system integrity.

Windows Defender Application Guard

• Windows:
  • Runs untrusted content in isolated containers.
  • Protects the host from potentially malicious websites and documents.

Credential Guard

• Windows:
  • Uses VBS to isolate and protect credentials.
  • Prevents attacks like Pass-the-Hash or Pass-the-Ticket.

Device Guard

• Windows:
  • Combines WDAC and virtualization-based security to lock down devices.
  • Ensures only trusted applications can run.

OS Loader and Hotpatching Changes (Windows 11 24H2+)

• Recent Windows versions (24H2 and later) introduced changes that impact classic process injection techniques like Process Hollowing (RunPE).
• Status: Client Hotpatching availability and cadence depend on SKU/servicing channel. Validate GA status in current Microsoft documentation.
• Windows Server 2025 requires an Azure Arc subscription for hotpatch servicing.

Impact on Process Hollowing (MEM_PRIVATE Payloads)

• Root Cause 1 (Error 0xC0000141): Native Hotpatching support added a new function RtlpInsertOrRemoveScpCfgFunctionTable during process initialization (LdrpInitializeProcess -> LdrpProcessMappedModule). This function calls ZwQueryVirtualMemory with a new MemoryImageExtensionInformation class, which only works on MEM_IMAGE memory regions.
  • Classic Process Hollowing stores the payload in MEM_PRIVATE memory (either by unmapping the original PE or allocating a new region).
  • The ZwQueryVirtualMemory call fails with STATUS_INVALID_ADDRESS for the MEM_PRIVATE payload region, causing process loading to terminate.
• Root Cause 2 (Error 0xC00004AC, Memory Integrity Enabled): If Memory Integrity (HVCI) is enabled, another check occurs later in the loading process.
  • LdrpQueryCurrentPatch is called on the payload's memory region.
  • This leads to a call to NtManageHotPatch, which fails with STATUS_CONFLICTING_ADDRESSES for the MEM_PRIVATE payload.
  • This error also terminates the process loading.

Solutions and Bypasses

1. Use Alternative Techniques (Recommended): Employ methods that map the payload as MEM_IMAGE, which are unaffected by these specific checks.
   • Examples: Process Doppelganging, Process Ghosting, Process Herpaderping, Transacted Hollowing, Ghostly Hollowing, Herpaderply Hollowing, Process Overwriting.
   • These techniques generally interact more naturally with the loader and newer OS features.
2. Patch NTDLL (If sticking to Classic RunPE):
   • For 0xC0000141: Hook ZwQueryVirtualMemory.
     • Check if the OS is Win11 24H2+ (64-bit).
     • If the MemoryInformationClass is MemoryImageExtensionInformation AND the query targets the base address of the MEM_PRIVATE payload:
       • Return a benign error like STATUS_NOT_SUPPORTED instead of calling the original function.
     • Otherwise, call the original ZwQueryVirtualMemory.
     • Implementation Example
   • For 0xC00004AC (Memory Integrity): Hook NtManageHotPatch.
     • Patch the function to immediately return a benign error like STATUS_NOT_SUPPORTED.
     • Apply this patch early in the process creation, for both 32-bit and 64-bit.
     • Ensure FlushInstructionCache is called if patching after the function might have been cached.
     • 32-bit Example
     • 64-bit Example

Control Flow Integrity and Execution Protections

Data Execution Prevention (DEP)

• Windows/Linux:
  • Marks certain memory regions as non-executable.
  • Prevents execution of code from data pages, mitigating buffer overflow attacks.

Bypass Techniques

• Return-oriented Programming (ROP): Using existing code fragments to create attack chains without injecting code.
• ret2libc: Jump directly to code in libc.
• ret2data: Place shellcode in the data section.
• ret2strcpy: Place shellcode on the stack and use strcpy to move it somewhere executable.
• ret2gets: Read from stdin to gain control.
• VirtualProtect/VirtualAlloc: Call these functions to change memory permissions.
• JIT Spraying: Leverage Just-In-Time compilation to get executable memory.

Practitioner

• use !vprot rip or !vpro rsp to check for protections inside WinDbg
• .scriptload G:\Projects\narly.js; !nmod also helps you to see which modules have DEP protection
• Data Execution Prevention settings inside Windows Exploit Guard can be used to force DEP protection on an executable
• pivot with VirtualProtect / NtProtectVirtualMemory (or pre‑ACG RWX section) from a ROP/JOP chain.
• Modern Windows 10/11 enforce CET (Shadow Stack) and XFG (Cross‑Function Guard), which break classic ROP; successful chains must first disable CET (for example with SetProcessMitigationPolicy) or switch to JOP/SCS gadgets.
• an example would be pop rcx; retn; pop rcx; retn; mov [rcx], rax; pop rbp; retn;
• we can use IAT to identify and call WriteProcessMemory which can be used to circumvent DEP protection through NtProtectVirtualMemory API
• Ropper 2.0 or Rizin‑ropper — both support CET/XFG‑aware gadget filtering.

Control Flow Integrity (CFI)

• Windows:
  • Ensures kernel execution follows legitimate paths.
  • Thwarts control-flow hijacking attacks like function pointer overwrites.

Bypass Techniques

• Similar Function Prototypes: For XFG (Extreme Flow Guard), functions with similar prototypes may be exploitable.
• Data-Only Attacks: Manipulating program state without violating CFI constraints.
• Implementation Weaknesses: Exploiting gaps in the implementation of CFI.
• JIT Compilation: Just-in-time compiled code may bypass CFI checks.

Practitioner

• Windows build: enable CFG/XFG via /guard:cf /guard:xfg and /Qspectre where applicable; inspect PE LoadConfig for CFG/XFG metadata.
• Linux build: Clang -fsanitize=cfi (user space) or CONFIG_CFI_CLANG=y (kernel), with LTO; verify symbols contain CFI jump tables.

kCFI

• Linux
  • Clang-based forward-edge Control-Flow Integrity that verifies indirect function calls at runtime in the kernel.
  • Enabled by default in Android GKI kernels and ChromeOS since early 2024; available upstream via CONFIG_CFI_CLANG.
  • Complements FineIBT and hardware CET by protecting software-only control-flow edges.
  • BHI Hardening (Linux 6.9/6.10): FineIBT now incorporates indirect‑branch serialization to mitigate Branch History Injection.

Control Flow Guard (CFG)

• Windows:
  • Ensures indirect calls go only to valid, predefined locations.
  • Helps prevent control-flow hijacking attacks.

Bypass Techniques

• JIT Code Execution: Using Just-In-Time compiled code which may not be properly protected.
• Import Address Table (IAT) Manipulation: Inserting entries in IAT since these aren't checked.
• Data-only Attacks: Modifying program data to influence control flow without redirecting execution.
• Type Confusion: Exploiting type confusion to bypass CFG checks.

Practitioner

• Check process mitigation: Get-ProcessMitigation -Name process.exe (PowerShell) → CFG/strictCFG/XFG states.
• PE inspection: dumpbin /loadconfig shows GuardCFFunctionTable and flags.

Stack Canaries

• Linux/Windows:
  • Inserts random values before return addresses on the stack.
  • Detects stack buffer overflows before they overwrite return addresses.

Bypass Techniques

• Leaking Canary Values: Using format string or other information disclosure vulnerabilities.
• Overwriting Non-return Variables: Attacking function pointers or other control flow variables not protected by canaries.
• Brute Force: On systems with low entropy canaries or predictable generation.
• Exception Handler Attacks: Targeting exception registration records which may not be protected.
• Unprotected Functions: Exploiting functions not protected by canaries (often due to performance considerations).

Stack Clash Protection

• Linux/GCC:
  • Prevents stack and heap collisions by probing stack pages during large allocations.
  • Mitigates privilege escalation attacks that rely on stack/heap layout manipulation.
  • Enabled with -fstack-clash-protection compiler flag.

Bypass Techniques

• Precise Heap Layout: Carefully crafting heap allocations to avoid clash detection.
• Small Allocations: Using allocations smaller than the probe size to avoid triggering protection.
• Alternative Memory Regions: Targeting other memory regions not protected by stack clash detection.
• Implementation Gaps: Exploiting edge cases in the probing logic.

Hardware‑Enforced Stack Protection

• Windows:
  • Utilizes Intel CET (specifically the Shadow Stack feature, referred to as Kernel Mode Hardware-enforced Stack Protection or KCET) and AMD Shadow Stack features.
  • Requires Hypervisor-Enforced Code Integrity (HVCI) / Virtualization-Based Security (VBS) to be enabled.
  • Provides a hardware-backed shadow stack to protect return addresses against ROP/JOP attacks.
  • Applies to kernel-mode stacks, including those associated with user-mode threads executing in kernel mode (e.g., during system calls).
  • Hardware-Enforced Stack Protection is enabled by default on compatible hardware with Windows 11, version 24H2, when VBS/HVCI is active. The IMAGE_GUARD_SHADOW_STACK PE flag indicates compatibility and is increasingly adopted for key binaries, with Windows components widely enabling it.

Bypass Techniques

• Increased Difficulty with HVCI: When combined with Hypervisor-Enforced Code Integrity (HVCI), bypassing hardware-enforced shadow stacks becomes significantly more challenging. HVCI leverages virtualization (Hyper-V) to protect the shadow stack's integrity via the Secure Kernel (VTL1). The Secure Kernel manages the shadow stack pointer (VMX_GUEST_SSP in the VMCS for VTL0) through hypercalls, preventing even kernel-mode code (VTL0) from directly tampering with it.
• Return Address Protection: The hardware compares the return address on the main stack with the one stored on the protected shadow stack before executing a RET instruction. Mismatches typically cause a fault (system crash for KCET), mitigating standard ROP/JOP attacks that rely on overwriting the return address on the main stack.
• Secure Kernel Validation: The Secure Kernel is involved in validating and restoring shadow stack context (e.g., during exception handling via functions like nt!KeKernelShadowStackRestoreContext and secure system calls like securekernel!SkmmNtKernelShadowStackAssist), adding another layer of integrity checking.
• Potential (Difficult) Vectors: Bypasses would likely require exploiting vulnerabilities in the hypervisor (Hyper-V) or the Secure Kernel itself, finding flaws in the hardware CET implementation, or developing sophisticated data-only attacks that achieve control without corrupting the stack's return addresses. These are considerably harder than bypassing software-based or unprotected hardware stack protections.
• Limited Scope: Like other CFI mechanisms, attacks targeting non-control data or logic bugs may still be possible if they don't violate the protected control flow.

Pointer Authentication (ARM64)

• Linux/iOS:
  • Uses cryptographic signatures to protect pointers.
  • Mitigates attacks like Return-Oriented Programming (ROP).

Bypass Techniques

• Unprotected Assembly Code: Assembly code often lacks PAC protection.
• Raw Function Pointers: Recovery handlers and other mechanisms that use raw pointers.
• Signing Gadgets: Using existing code that signs pointers.
• Switch Case Branches: Unprotected indirect branches in switch case implementations.
• Authentication Failure Handling: Exploiting cases where authentication failures don't trigger exceptions.
• Thread State Manipulation: Incorrect handling of thread state during context switches.

Intel Control‑flow Enforcement Technology (CET)

• Hardware feature providing protections against control-flow hijacking.
• Includes Shadow Stack and Indirect Branch Tracking.
• Enabled by default starting with Windows 11 build 26100 (Win11 24H2+). Any stack pivot or ret without a valid shadow‑stack token raises STATUS_STACK_BUFFER_OVERRUN (0xC0000409).
• Detect CET: Read the IMAGE_DLLCHARACTERISTICS_GUARD_CF flag in the PE header or PEB→LdrDataTableEntry.GuardFlags.
  • Windows: Get-ProcessMitigation -System shows UserShadowStack and UserCetEnabled.
  • Linux: check cet_ss in /proc/cpuinfo and prctl(PR_SET_SHADOW_STACK_STATUS, ...).
• Bypass tips for CET in shellcode:
  1. Align the shellcode entry to a valid call target and emit ENDBR64/SETSSP before the first ret.
  2. Use ROP‑less staging (queued APC, NtContinue, or NtTestAlert) so the kernel performs the first return.

Intel Indirect Branch Tracking (IBT)

• Linux/Windows:
  • Part of Intel CET that enforces legitimate indirect branch targets.
  • Requires ENDBR32 or ENDBR64 instructions at valid indirect call/jump destinations.
  • Prevents JOP (Jump-Oriented Programming) attacks by validating branch targets.
  • Available on Tiger Lake+ CPUs, enabled via CET_IBT bit in MSR.

Bypass Techniques

• ENDBR Gadgets: Finding existing code sequences that start with valid ENDBR32/64 instructions.
• ENDBR Spraying: Injecting or finding multiple ENDBR instructions to create gadget chains.
• Unprotected Modules: Targeting libraries or code not compiled with IBT support.
• Legacy Code Paths: Exploiting code paths that bypass IBT checks (e.g., signal handlers, exception contexts).
• Hardware Quirks: Exploiting CPU-specific implementation differences or errata.

Practitioner

• Check IBT status: cat /proc/cpuinfo | grep cet_ibt (Linux) or inspect cr4.cet bit
• Compile with IBT: -fcf-protection=branch (GCC) or -mcet flag
• Binary analysis: Look for ENDBR64 (0xF3 0x0F 0x1E 0xFA) or ENDBR32 (0xF3 0x0F 0x1E 0xFB) instructions

Shadow Call Stack (SCS)

• Linux:
  • Compiler-based CFI mechanism using a shadow stack to protect return addresses.
  • Helps prevent ROP attacks.
  • Ensures only signed and verified code can execute in kernel mode.
  • Blocks RWX pages and unsigned kernel callbacks when Memory Integrity is ON (default on 2024‑hardware).
  • Common allocation pattern for executable memory: PAGE_READWRITE → write payload → NtProtectVirtualMemory → PAGE_EXECUTE_READ.
  • WoW64 heaven‑gate patches to WOW64CFG are rejected by HVCI; favour direct 64‑bit syscalls (e.g., via wow64log).

Bypass Techniques

• Data‑only Attacks (no return‑address writes).
• Hypervisor/Kernel Bugs that corrupt GCS state.

Guarded Control Stack (GCS)

• Linux/ARM64:
  • Hardware user‑space shadow stack on Armv9‑A CPUs, merged in Linux 6.13 and on by default in modern Android.
  • Complements KCET/CET on x86.

PAN‑GCS Dual Enforcement (Android 16, Armv9 Realms)

• From Android 16, GCS (shadow stack) plus Privileged Access Never (PAN) are mandatory for all Play‑targetSdk 34+ apps running on Armv9 Realms hardware, providing dual hardware + software enforcement.

Bypass Techniques

• Data‑only Attacks (no return‑address writes).
• Hypervisor/Kernel Bugs that corrupt GCS state.

FineIBT

• Linux:
  • Enhanced CFI mechanism for indirect branch targets.
  • Provides finer-grained control flow protection than basic CFI.
  • The initial implementation was vulnerable to Branch History Injection (BHI). Hardened FineIBT with serialising INT3 fences landed upstream in Linux 6.14

Arbitrary Code Guard (ACG)

• Windows:
  • Prevents processes from allocating or modifying memory to be executable.
  • Mitigates attacks relying on dynamic code generation or modification.

Practitioner

• Check ACG: Get-ProcessMitigation -Name process.exe | Select-Object -ExpandProperty DynamicCode.
• WDAC policy can enforce ACG: audit with Get-CIPolicy and CodeIntegrity logs.

Code Integrity Guard (CIG)

• Windows:
  • Restricts loading of DLLs to only those signed by Microsoft or WHQL.
  • Prevents loading of potentially malicious or untrusted libraries.

Practitioner

• PowerShell: Get-ProcessMitigation -Name process.exe | Select-Object -ExpandProperty BinarySignature.
• Event Logs: Microsoft-Windows-CodeIntegrity/Operational for blocked DLL loads.

Kernel Control-Flow Guard (kCFG)

• Windows:
  • Kernel-specific implementation and enforcement of Control Flow Guard.
  • Protects against control-flow hijacking within the kernel itself.

eXtended Flow Guard (XFG)

• Windows:
  • Debuted with Windows 11 23H2. Adds strict function‑prototype hashing to CFG, blocking many type‑confusion escapes.

Bypass Techniques

• Prototype Collisions (extremely rare).
• Modules Without XFG (legacy or JIT code).

Export Address Filtering (EAF) / Import Address Filtering (IAF)

• Windows:
  • Protects module export and import tables from tampering.
  • Prevents attacks that redirect function calls by modifying these tables.

Structured Exception Handling Overwrite Protection (SEHOP)

• Windows:
  • Protects the integrity of exception handler chains on the stack.
  • Prevents exploits that overwrite exception handlers to gain control flow.

Bypass Techniques

• Modules Without SafeSEH: A single module without protection breaks the chain.
• ROP Chains: Building ROP chains that don't rely on exception handlers.
• Alternative Attack Vectors: Targeting other vulnerable components not protected by SEHOP.
• Unprotected Exception Handlers: Finding handlers that are still vulnerable.

Exploit Address Table Filtering (EAF & EAF+)

• Windows:
  • Blocks access to Export Address Tables of critical DLLs like kernel32.dll and ntdll.dll.
  • EAF+ allows specifying modules not permitted to access the EAT, particularly targeting UAF bugs.
  • Uses hardware breakpoints to filter access attempts.

Bypass Techniques

• Alternative Discovery Methods: Using different techniques to locate functions.
• Unprotected Modules: Targeting modules not covered by EAF protection.

Import Address Filtering (IAF)

• Windows:
  • Ensures all functions listed in a DLL's IAT exist within the image's load address range.
  • Prevents IAT overwrite attacks.

Virtual Table Guard

• Windows:
  • Ensures virtual function table pointers point to valid guard pages.
  • Terminates execution if invalid vptrs are detected.
  • Protects against C++ virtual function table overwrites.

MemGC

• Windows:
  • Replacement for MemProtect technology.
  • Specifically targets mitigation of use-after-free exploitation.

Kernel Text Read-only Region (KTRR)

• iOS:
  • Prevents modification of the iOS kernel at runtime.
  • Implements hardware-enforced read-only memory for kernel code.

KTRR‑v2 & FastPAC (iOS 18, A18/A19)

• Hardware‑enforced cache‑colouring prevents pointer‑authentication re‑spray, complementing traditional KTRR for stricter kernel integrity.

Intel Memory Protection Extensions (MPX)

[!NOTE] Support was removed from Linux 5.6 (April 2020) and GCC 9.1; no mainstream OS or compiler ships MPX today.

Heap Protections

Heap Cookies

• Windows:
  • Places a 1-byte value in the metadata of heap chunks.
  • Detects heap metadata corruption before exploitation.

AMSI Heap Scanning (Jan 2025)

• Windows:
  • AMSI (Antimalware Scan Interface) scans newly committed writable heap pages before they are flipped to PAGE_EXECUTE_READ or PAGE_EXECUTE_WRITECOPY.
  • Safer allocation pattern to avoid AMSI heap scanning: Reserve memory with PAGE_NOACCESS, decrypt/deobfuscate payload in‑place, then change protection to PAGE_EXECUTE_READ.
  • The classic "patch the AMSI ASCII tag in amsi.dll" trick no longer works reliably; consider patching the COM VTable entry for IAmsiStream::QueryInterface or using a proxy‑DLL hook instead.

Low Fragmentation Heap (LFH)

• Windows:
  • First 32-bit of metadata gets XORed with canary to ensure integrity.
  • Allocates blocks in predetermined size ranges by organizing blocks into buckets.
  • Reduces heap predictability and exploitation potential.

Safe Unlink

• Windows/Linux:
  • Checks integrity of pointers before freeing memory chunks.
  • Prevents unlink exploitation in heap management.

Bypass Techniques

• Heap Overflow: Using malloc maleficarum techniques.
• Chunk-on-Lookaside Overwrite: Targeting specific heap management structures.

Heap and Stack Protections

• Windows:
  • Implements guard pages and heap allocation randomization.
  • Detects and prevents buffer overflows and stack smashing.

Randomization Techniques

Address Space Layout Randomization (ASLR)

• Linux & Windows:
  • Randomizes memory addresses used by executables and libraries.
  • Makes it harder for attackers to predict target addresses.

Bypass Techniques

• Information Leaks: Exploiting vulnerabilities to leak addresses of loaded modules.
• ROP with PLT/GOT: Using the Procedure Linkage Table to leak addresses and calculate base addresses.
• Low Entropy: Exploiting systems with limited randomization bits.
• Heap Spraying: Filling memory with copies of shellcode to increase hit probability.
• Local Privilege Escalation: Using local exploits to bypass protection.
• Partial Overwrite: Overwriting only part of an address to maintain alignment.
• Statically Linked Code: Targeting code that doesn't use ASLR.

Practitioner

• you probably first need an information leak to identify the correct memory address and then use it to circumvent ASLR and DEP
• format string bugs also helps trigger an information leak, so you can use them alongside ropchains to bypass ASLR and DEP
• information leaks are often happen through logical errors or memory corruption bugs

Position Independent Executables (PIE)

• Linux/Windows:
  • Compiles executables as position-independent code, enabling ASLR for the main executable.
  • Without PIE, the main executable loads at a fixed base address, providing attackers a reliable target.
  • Essential for full ASLR coverage across all memory regions.

Bypass Techniques

• Information Leaks: Same techniques as ASLR bypass - leak addresses to calculate base.
• Partial Overwrites: Overwriting only the lower bytes of addresses to maintain relative offsets.
• Non-PIE Dependencies: Targeting linked libraries that aren't position-independent.
• GOT/PLT Attacks: Exploiting Global Offset Table entries before they're resolved.

Practitioner

• Check PIE status: file /path/to/binary or readelf -h /path/to/binary | grep Type
• Compile with PIE: -fPIE -pie (GCC) or -fPIC -shared for libraries
• Detect at runtime: /proc/PID/maps shows randomized executable base addresses
• checksec: checksec --file=/path/to/binary shows PIE status

ASCII Armored Address Space

• Windows:
  • Loads all shared libraries in addresses starting with 0x00.
  • Prevents string manipulation exploits that terminate at null bytes.

Bypass Techniques

• Partial Injection: Still possible to inject one null byte.
• Main Executable Attacks: Main executable is not moved, so attackers can target it instead.

Function Granular KASLR (FGKASLR)

• Linux:
  • Randomizes kernel functions at a finer granularity.
  • Enhances address space randomization effectiveness.

Kernel Stack Randomization

• Linux:
  • Randomizes the kernel stack base address per process.
  • Makes stack-based attacks more challenging.

Mandatory ASLR (MASLR)

• Windows:
  • Forces the rebasing of modules even when they were compiled without ASLR support.
  • Enhances protection against code reuse attacks.

Bottom-Up ASLR (BASLR)

• Windows:
  • Works alongside MASLR to randomize allocation patterns.
  • Blocks 64KB allocations from requested base address up to a randomly selected number.
  • Repeats randomization each time the process restarts.

Side-Channel Attack Mitigations

Speculative Execution Mitigations

• Linux/Windows:
  • Addresses vulnerabilities like Spectre and Meltdown.
  • Includes microcode updates and patches to prevent speculative execution attacks.

Recent Spectre Mitigations

• IBPB (Indirect Branch Prediction Barrier):

  • Intel/AMD feature that flushes indirect branch predictors.
  • Prevents cross-privilege domain speculation leakage.
  • Controlled via MSR_IA32_PRED_CMD.

• IBRS (Indirect Branch Restricted Speculation):

  • Restricts speculation of indirect branches when in higher privilege levels.
  • Mitigates Spectre v2 by preventing user-space speculation attacks on kernel.
  • Performance overhead led to adoption of retpolines as primary mitigation.

• STIBP (Single Thread Indirect Branch Predictors):

  • Prevents sibling threads from controlling each other's indirect branch prediction.
  • Mitigates cross-hyperthread Spectre attacks.
  • Particularly important for SMT (Simultaneous Multi-Threading) environments.

• SSBD (Speculative Store Bypass Disable):

  • Prevents speculative execution of loads that bypass older stores.
  • Mitigates Spectre v4 (Speculative Store Bypass).
  • Can be controlled per-process via prctl() on Linux.

Bypass Techniques

• Microarchitectural Timing: Using cache timing, TLB timing, or other side channels.
• Cross-Process Leakage: Exploiting shared microarchitectural state between processes.
• Hardware Implementation Gaps: CPU-specific vulnerabilities in mitigation implementations.
• Performance Optimization Exploitation: Targeting cases where mitigations are disabled for performance.

Practitioner

• Check mitigations: cat /proc/cpuinfo | grep -E "(ibpb|ibrs|stibp|ssbd)"
• Runtime controls: /sys/devices/system/cpu/vulnerabilities/ directory
• Per-process SSBD: prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, ...)
• Performance impact: Use perf to measure mitigation overhead

Kernel Memory Sanitizer (KMSAN)

• Linux:
  • Detects use of uninitialized memory in the kernel.
  • Helps find and fix initialization bugs.

Linux Kernel Runtime Guard (LKRG)

• Linux (Module):
  • Loadable kernel module performing runtime integrity checks on critical kernel structures.
  • Aims to detect and prevent various exploits in real-time.

Spectre-BHB Mitigations

• Linux:
  • Addresses Branch History Injection vulnerabilities on ARM.
  • Prevents certain speculative execution attacks.

Dynamic Analysis and Detection Tools

Kernel Address Sanitizer (KASAN)

• Linux:
  • Dynamic memory error detector for the kernel.
  • Identifies use-after-free and out-of-bounds bugs.

eBPF Verification Enhancements

• Linux:
  • Strengthens verification of eBPF programs loaded into the kernel.
  • Prevents exploitation via the eBPF subsystem.

Windows Defender Security Features

Windows Defender Application Control (WDAC)

• Windows:
  • Controls which drivers and applications are allowed to run.
  • Uses code integrity policies to prevent unauthorized code execution.

Practitioner

• Enumerate policies: Get-CIPolicy -Effective and Get-ComputerInfo | Select WindowsProductName, WindowsVersion.
• Validate blocklists: ensure DriverSiPolicy.p7b is current; check with gpresult /r or MEM policies.

Exploit Protection

• Windows:
  • System-wide mitigation settings against common exploit techniques.
  • Includes heap spray allocation prevention, mandatory ASLR, etc.

Practitioner

• Export/import settings via Export-ProcessMitigation / Set-ProcessMitigation.
• Audit per‑process: Get-ProcessMitigation for DEP/ASLR/SEHOP/CFG/XFG.

Attack Surface Reduction (ASR) Rules

• Windows:
  • Part of Windows Defender Exploit Guard, providing configurable rules.
  • Blocks specific behaviors often associated with malware or exploits (e.g., Office macro execution, script obfuscation).

Practitioner

• Query ASR state: Get-MpPreference | Select -ExpandProperty AttackSurfaceReductionRules_Ids, AttackSurfaceReductionRules_Actions.
• Enable common rules in audit first; deploy in enforced after tuning.

Smart Screen

• Windows:
  • Analyzes files and websites for suspicious characteristics.
  • Warns or blocks potentially malicious content.

Controlled Folder Access

• Windows:
  • Protects files and folders from unauthorized changes.
  • Helps prevent ransomware from encrypting or deleting data.

File System and Data Protections

Filesystem Protections (fs-verity & fscrypt)

• Linux:
  • fs-verity: Provides integrity protection for read-only files.
  • fscrypt: Enables filesystem-level encryption for data at rest.

BitLocker Drive Encryption

• Windows:
  • Full disk encryption to protect data at rest.
  • Uses TPM and user credentials for encryption keys.

Integrity Measurement Architecture (IMA) / Extended Verification Module (EVM)

• Linux:
  • Provides runtime integrity checking for files and metadata based on stored hashes.
  • Ensures files haven't been tampered with post-boot.

Access Control and Attack Surface Reduction

Strict Syscall Filtering (Seccomp)

• Linux:
  • Allows applications to restrict system calls they can invoke.
  • Reduces the kernel's attack surface from user-space applications.
• Seccomp user‑notifier:
  • Enables broker‑style decisions in userspace; defend against confused‑deputy by strict validation and time‑bounded decisions
  • Attackers may abuse notifier latency for TOCTOU races; keep policies minimal and deterministic

Practitioner

• Inspect running process seccomp: grep Seccomp /proc/<pid>/status (0=disabled, 1=strict, 2=filter).
• Use seccomp-tools dump <pid> to view filters; in containers, inspect OCI seccomp profile.

Container Security Mitigations

• User Namespaces:

  • Isolates user and group IDs between host and container.
  • Provides privilege isolation without requiring root on the host.
  • Maps container root (UID 0) to unprivileged user on host.

• PID Namespaces:

  • Isolates process IDs, preventing container processes from seeing host processes.
  • Container init process becomes PID 1 within its namespace.

• Network Namespaces:

  • Provides isolated network stack (interfaces, routing tables, firewall rules).
  • Prevents network-based container escape attacks.

• Mount Namespaces:

  • Isolates filesystem view, preventing access to host filesystem.
  • Combined with chroot-like restrictions and read-only mounts.

• Capability Dropping:

  • Removes dangerous Linux capabilities from container processes.
  • Examples: CAP_SYS_ADMIN, CAP_NET_ADMIN, CAP_SYS_MODULE.

• Seccomp Profiles:

  • Restricts system calls available to containerized processes.
  • Default Docker/Podman profiles block ~44 dangerous syscalls.

• AppArmor/SELinux Profiles:

  • Mandatory Access Control for container processes.
  • Restricts file access, network operations, and capabilities.

Container hardening quick test

docker inspect <ctr> | jq '.[0].HostConfig.SecurityOpt, .[0].HostConfig.CapDrop'
capsh --print
lsns | grep " $(cat /proc/self/ns/pid) \|net\|mnt\|user\|ipc\|uts"
grep Seccomp /proc/$$/status
id -Z 2>/dev/null || echo "No SELinux context"

Bypass Techniques

• Namespace Escapes: Exploiting kernel bugs in namespace implementations.
• Capability Abuse: Leveraging remaining capabilities (e.g., CAP_DAC_OVERRIDE) for privilege escalation.
• Seccomp Bypasses: Finding allowed syscalls that can be chained for exploitation.
• Container Runtime Exploits: Targeting Docker/containerd/runc vulnerabilities.
• Host Resource Access: Exploiting mounted host resources (sockets, devices, filesystems).
• Privileged Containers: Targeting containers running with --privileged flag.

Practitioner

• Check container mitigations: docker inspect <container> or podman inspect <container>
• Audit capabilities: capsh --print inside container
• List namespaces: lsns or ls -la /proc/$$/ns/
• Seccomp status: grep Seccomp /proc/$$/status
• SELinux context: id -Z (if SELinux enabled)
• Container security scanning: Tools like docker-bench-security, kube-bench

Lockdown Mode

• Linux:
  • Restricts access to kernel features that could allow code execution.
  • Enhances security, especially with Secure Boot enabled.
  • Linux 6.14 extends lockdown to cover kexec‑file pinning and loads the built‑in module blocklists earlier, further closing BYOVD avenues.

Executable‑policy Securebits

• Linux 6.14: Introduces SECBIT_EXEC_RESTRICT_FILE and SECBIT_EXEC_DENY_INTERACTIVE securebits together with the AT_EXECVE_CHECK flag, allowing interpreters to delegate final execution‑permission checks to the kernel and tightening script/loader abuse paths.

NTSYNC Driver Hardening

• Linux 6.14: The new ntsync driver offers an io_uring‑based fast‑path that removes classic futex primitives from reachable attack surface, reducing user→kernel synchronization abuse.

Landlock LSM

• Linux:
  • Unprivileged sandboxing framework allowing processes to restrict their own access rights.
  • Reduces the impact of compromised user-space applications.

AppContainer and User Account Control (UAC)

• Windows:
  • AppContainer: Application isolation for modern apps.
  • UAC: Limits application privileges, prompting for elevation when necessary.

PatchGuard (KPP)

• Windows:
  • Protects the kernel from modifications of critical structures and registers.
  • Periodically checks for unauthorized modifications to kernel structures.
  • Asynchronously monitors critical structures: IDT, GDT, SSDT, MSRs, kernel stacks
  • Triggers CRITICAL_STRUCTURE_CORRUPTION BSOD (0x109) when tampering detected
  • Modern impact: Blocks classic SSDT/IDT hooking on Windows 10/11

Bypass Techniques

• Bootkit Deployment: Bypassing protection at boot time before PatchGuard initializes.
• Debugging Bypass: PatchGuard doesn't run if a debugger is attached at boot.
• Timing Attacks: Taking advantage of the periodic nature of PatchGuard checks.
• Memory Manipulation: Modifying kernel memory without triggering detection mechanisms.
• Hypervisor-based: Type 1 hypervisor using EPT to hide kernel modifications

Windows Sandbox

• Windows:
  • Provides a disposable virtual environment.
  • Runs untrusted software isolated from the host system.

Module Signing Enforcement

• Linux/Windows:
  • Code signing for kernel modules
  • Prevents loading of unsigned or maliciously modified kernel components

Block Remote Images

• Windows:
  • Prevents loading DLLs from UNC file paths (e.g., \\evilsite\bad.dll).
  • Blocks attackers from bypassing ASLR by loading non-rebased modules.

Block Untrusted Fonts

• Windows:
  • Only loads fonts from trusted locations.
  • Prevents attacks like Stuxnet that exploit font rendering vulnerabilities in kernel mode.

Validate Handle Usage

• Windows:
  • Checks handle references to ensure they are valid.
  • Prevents exploitation of handle misuse.

Disable Extension Points

• Windows:
  • Blocks registry-based extension points like AppInit_DLL.
  • Prevents hooking or extending applications through known extension mechanisms.

Disable Win32k System Calls

• Windows:
  • Disables unused system calls to reduce attack surface.
  • Particularly effective against kernel exploits.

Do Not Allow Child Processes

• Windows:
  • Blocks the ability for a process to call the CreateProcess function.
  • Prevents malware from spawning additional processes (also known as "Calc Killer").

Validate Image Dependency

• Windows:
  • Requires any DLL loaded by a process to be signed by Microsoft.
  • Prevents DLL side-loading attacks.

Block Low Integrity Images

• Windows:
  • Blocks processes running at low or untrusted integrity levels from loading downloaded files.
  • Enhances sandbox security.

Usermode Helper (UMH) Mitigations

• Linux:
  • CONFIG_STATIC_USERMODEHELPER: Forces all usermode helper calls through a static binary.
  • CONFIG_STATIC_USERMODEHELPER_PATH: Sets the path to the static usermode helper binary.
  • Prevents attackers from abusing kernel-to-userspace execution paths.
  • Requires userspace support.

SMB Signing

• Windows:
  • Adds cryptographic signatures to Server Message Block (SMB) packets.
  • Prevents man-in-the-middle attacks against network file sharing.

Hardware-Assisted Security Features

Trusted Platform Module (TPM) 2.0

• Windows/Linux:
  • Secure crypto-processor enhancing hardware security.
  • Used for secure boot, disk encryption, and credentials.

Secure Boot

• Windows/Linux:
  • Ensures only trusted, signed software loads during boot.
  • Prevents boot-level malware from starting before the OS.

UEFI Firmware Security

• Windows/Linux:
  • Provides a secure pre-OS environment.
  • Supports Secure Boot and firmware integrity checking.

Diagrams

Modern Security Architecture

flowchart TB
    System["System Security"]

    subgraph "Memory Protection"
        KASLR["Kernel ASLR"]
        KPTI["Kernel Page Table Isolation"]
        SMAP["Supervisor Mode Access Prevention"]
        SMEP["Supervisor Mode Execution Prevention"]
        KDP["Kernel Data Protection"]
        RODATA["Read-Only Data Sections"]
    end

    subgraph "Virtualization Security"
        VBS["Virtualization-Based Security"]
        HVCI["Hypervisor-Enforced Code Integrity"]
        MBEC["Mode-Based Execution Control"]
        KMCI["Kernel Mode Code Integrity"]
    end

    subgraph "Control Flow Protection"
        CFG["Control Flow Guard"]
        CET["Control-Flow Enforcement Technology"]
        KCFG["Kernel Control Flow Guard"]
    end

    System --> KASLR
    System --> KPTI
    System --> SMAP
    System --> SMEP
    System --> KDP
    System --> RODATA
    System --> VBS
    System --> HVCI
    System --> MBEC
    System --> KMCI
    System --> CFG
    System --> CET
    System --> KCFG

Virtualization-Based Security Stack

flowchart TB
    Hardware["Hardware (CPU with Virtualization Support)"]
    Hypervisor["Hypervisor (Hyper-V)"]
    VTL1["VTL1 (Secure Kernel)"]
    VTL0["VTL0 (Normal Windows Kernel)"]
    Apps["User Applications"]

    Hardware --> Hypervisor
    Hypervisor --> VTL1
    Hypervisor --> VTL0
    VTL0 --> Apps

    subgraph "Secure World"
        VTL1
        SecureServices["Secure Services"]
        CredGuard["Credential Guard"]
        KMCI["Kernel Mode Code Integrity"]
    end

    VTL1 --> SecureServices
    VTL1 --> CredGuard
    VTL1 --> KMCI

Exploit Mitigation Evolution

flowchart LR
    ClassicMitigations["Classic Mitigations"]
    ModernMitigations["Modern Mitigations"]
    FutureMitigations["Future Mitigations"]

    subgraph "2000s"
        DEP["DEP/NX"]
        ASLR["ASLR"]
        Stack["Stack Cookies"]
        SafeSEH["SafeSEH"]
    end

    subgraph "2010s"
        CFG["Control Flow Guard"]
        VBS["Virtualization-Based Security"]
        HVCI["HVCI"]
        WDAC["WDAC"]
    end

    subgraph "2020s+"
        CET["CET Shadow Stack"]
        MTE["Memory Tagging"]
        CFI["Full CFI"]
    end

    ClassicMitigations --> DEP
    ClassicMitigations --> ASLR
    ClassicMitigations --> Stack
    ClassicMitigations --> SafeSEH

    ModernMitigations --> CFG
    ModernMitigations --> VBS
    ModernMitigations --> HVCI
    ModernMitigations --> WDAC

    FutureMitigations --> CET
    FutureMitigations --> MTE
    FutureMitigations --> CFI